3M 30NF Fastbond Contact Adhesive - 1 Gal - 21186

3M™ Fastbond™ Contact Adhesive 30NF is a low-odor, water-based adhesive designed to deliver a high-strength, high-coverage bond with a bonding range of 4 hours. Post-formable and high-temperature-resistant, this adhesive is non-flammable in the wet state. 3M™ Fastbond™ Contact Adhesive 30NF is proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.

Features:

• This product is designed exclusively for industrial applications
• Bonds most foamed plastics, plastic laminate, wood, plywood, and canvas
• Creates a high-strength, high-temperature-resistant bond
• Delivers up to a four-hour bonding range
• Can be applied by either spray, brush, or roller
• Non-flammable in its wet state

Specifications:

• Application: Adhering floor coverings, bond countertop laminate to particle board, bond honeycomb core to metal, bond polystyrene foam panels, bond wood veneer to particle board, carpet attaching, floor bonding, large surface lamination assembly
• Application Method: Brush, roll, spray
• Assembly Type: Large surface lamination
• Environmental Considerations: California air resources board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
• Flame Retardant: Non-flammable
• Full Cure Time: 24 hr
• Heat Resistance Temperature: <300 °F (<148 °C)
• Open Time: 30 min - 4 hr
• Physical Form: Thin liquid
• Solids Weight Percent (Approximate): 47% - 51%
• Specific Gravity: 1.1
• Storage Temperature: 60 °F - 80 °F (16 °C - 27 °C)
• Substrate: Cork, fiberglass reinforced plastic, hardwood, high pressure laminate, leather, metal, plastic (ABS, PVC, acrylic), polyolefin foam, polystyrene foam, rigid foam (beadboard styrene), rigid foam (urethane), rubber (except EPDM), wood
• Surface Type: Laminate, plywood, polyurethane foam, wood
• Viscosity Range (cps) at Room Temperature: 200-750
• Size: 1 Gal (3.78 L)

Technical Data Sheet

Safety Data Sheet