3M Performance Spray Gun Ball Valve - 26839

3M™ Performance Spray Gun Ball Valve is an accessory for the 3M™ Performance Spray Gun System configured as a pressure feed sprayer. The valve gives the spray gun operator the ability to stop the flow of paint from the pressure source (pot or pump) at the spray gun end of the supply hose. Recommended for use when the painter does not have easy access to the pressure source. Light and easy to use.

The addition of a 3M™ Performance Spray Gun Ball Valve allows a painter to quickly stop flow of liquid to the 3M™ Performance Spray Gun when the spray gun is set up as a pressure feed sprayer. This valve is recommended whenever the painter cannot easily access the pressure source (e.g. on a ladder or a long distance away).

The lightweight valve is compatible with both waterborne and solvent-based coatings. It attaches to the whip hose at the bottom end of the spray gun handle. Valve has one male and one female threaded fitting.

The quarter-turn handle aligns parallel to the hose when it is open, perpendicular when it closed.

Features:

• Specifically designed replacement part for 3M™ Performance Spray Gun
• Durable stainless steel construction resists wear, bending and damage
• Engineered to provide a leakproof seal when used with 3M™ Performance Spray Gun atomizing heads
• Controls fluid flow as the trigger of the HVLP spray gun is pulled
• Performance tune-up without a full spray gun rebuild

Specifications:

• Air Consumption: 13 scfm (368.12 L/min)
• Application: Coating application, coating spraying, paint application, painting, tools & accessories
• Material: Aluminum
• Nozzle Diameter: 1.25" (33 mm)
• Operating Pressure: 145 psi (9.9974 bar)