Item #932807

Actisense NMEA 2000 Engine Monitoring Unit - EMU-1

51 Review
$813.28
Want an email once available?

Image of : Actisense NMEA 2000 Engine Monitoring Unit - EMU-1 Actisense NMEA 2000 Engine Monitoring Unit - EMU-1 Item # 932807

Description

The Actisense EMU-1 Engine Monitoring Unit shares vital engine information on the NMEA 2000® bus by digitizing analogue engine sensors. A EMU-1 unit can be configured to suit the engine it is working with, offering a flexible solution for multiple engine makes and models. It is capable of reading a wide range of engine parameters, and will report how the engine is operating and share the information across the network.

Features:

  • Enables analogue signals to be converted to NMEA 2000® messages
    • Upgrades an existing engine, allowing older engines to be used with to the latest digital MFDs
  • Convert signals from two engines (that share a common ground) with a single EMU-1
  • Six gauge/parameter inputs for connecting to resistive/voltage gauges or resistive senders
  • Four alarm inputs connects directly to alarm switches or gauge signals and maps them to NMEA2000 alarms
  • Two Tacho inputs for connecting directly to the RPM signals from 1 or 2 engines (with a common ground)
  • Two additional auxiliary inputs for future expansion opportunities
  • Customized case protects electronic parts and connections
  • Input protection protects against reverse polarity and transients
  • Wide power compatibility of 9 to 40 VDC for use on most common power systems
  • Bulkhead mount, with optional DIN rail mount kit
  • Total engine hours are logged by the monitoring of engine tach (RPM) input
    • Accumulated engine running hours are stored and shared as NMEA 2000 data

Specifications:

Power

  • Voltage: 9 to 35 VDC
  • Current: Typically < 25mA @ 12 VDC
  • Protection: Continuous reverse polarity protection and load dump protection (meets SAE J1113)
  • Connector: Pluggable 2-way screw terminal, 3.5mm pitch
  • Voltage (NMEA 2000 port): 9 to 29 VDC
  • Current (NMEA 2000 port): < 20mA @ 12 VDC from NMEA 2000 bus
  • Load equivalent number (LEN): 1
  • Protection (NMEA 2000 port): Continuous reverse polarity protection and overvoltage protection to 40V

NMEA 2000 Port In/Out

  • Compatibility: Fully NMEA 2000 certified
  • Galvanic isolation: 2500V input to ground, 1500V output to ground using ISO-Drive
  • Speed / baud rate: 250 kbps
  • NMEA 2000 connector: M12 male (A coded) connector

Gauge Inputs

  • Voltage range: 0 to 35 VDC
  • Input impedance: > 50kΩ
  • Sender feed: 0, 4 or 18mA
  • Accuracy: <= 2%
  • Input connector: Pluggable 6-way screw terminal, 3.5 mm pitch
  • Input protection: Overvoltage protection to ±40V

Alarm Inputs

  • Voltage range: 0 to 37 VDC
  • Input impedance: > 50kΩ
  • Threshold voltage: Configurable, default is 5V
  • Alarm polarity: Configurable, default is alarm on low input
  • Accuracy: <= 2%
  • Input connector: Pluggable 6-way screw terminal, 3.5 mm pitch
  • Input protection: Overvoltage protection to ±40V

Tacho Inputs

  • Voltage range: ±3 to ±60V
  • Input impedance: > 100kΩ to ground
  • Input pulse range: 4 to 50,000Hz
  • Accuracy: <= 1%
  • Sender compatibility: Ignition coil, alternator ("W", "R" or "AC") terminal, hall effect, VR or inductive sender
  • Threshold: Automatically adjusts to signal level
  • Input connector: Pluggable 4-way screw terminal, 3.5 mm pitch
  • Input protection: Can withstand an ignition pulse to ±500V

Engine Log

  • Engine hours: 2 Separate engine hour logs internally connected to the Tacho inputs. Hours are logged when RPM is present, stored in non-volatile memory

Mechanical

  • Housing material: Polycarbonate
  • Protective lid material: Polycarbonate
  • Sealing materials: Expanded silicone foam gasket, closed cell polyurethane splash guard and ePTFE waterproof vent
  • Dimensions (LxWxH): 127 x 112 x 48 mm
  • Weight: 250g
  • Mounting: 4 x 3.5mm lugs to allow panel mount with self tapping s/s screws (included), optional DIN Rail mount available on request

Approvals and Certifications

  • Fully NMEA 2000 certified
  • EMC: EN 60945 (sections 9 & 10)
  • Environmental protection: IP66 (PCB housing)
  • Operating temperature: -20° C to +55° C
  • Storage temperature: -30° C to + 70° C
  • Recommended humidity: 0 - 93% RH

Data Sheet

User Manual

Part Numbers for Actisense NMEA 2000 Engine Monitoring Unit - EMU-1

Videos

Videos

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.7ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 3.14ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;