Airmar SS510 Analog D/T Portable Survey Ultrasonic Transducer - SS510A-200-33

Airmar's commitment to innovative technology has produced the patented SS510. This broadband, 200 kHz transducer has a Q of 2 and very good sensitivity. It enables users to perform accurate surveys in shallow water with high resolution. This transducer can also be "Chirped" with a long pulse over a wide-frequency band. Users with adjustable-frequency echosounders will be able to regulate the operating frequency and tailor the beamwidth to specific survey conditions, and the treaded stem allows portable mounting.

Features:

• Broadband with low Q of 2
• Minimal sidelobes for concentrated energy on target, providing excellent definition
• Internal transformer provides impedance match to echosounder and allows use of longer cable
• 500W RMS, power rating is at 2% duty cycle
• Short, threaded stem simplifies attaching to portable-mounting apparatus
• Robust, stainless-steel housing
• Exclusive Xducer ID® technology

Specifications:

• Acoustic window: Urethane
• Beam angle: 8°
• Cable length: 33' (10 m)
• CE certification: Marine standard IEC60945
• Comm method: Analog
• Connector: Bare wire
• Current draw: 150 mA @ 12V for 200 kHz
• Depth accuracy: 99.46% at full range
• Depth display resolution: .40" (1 cm)
• Display connector: 0
• Flash reprogrammability: Using boot loader with encryption
• Frequency band: 200 kHz
• Full auto mode data output rate: From 0.1 to 25 sec/interval
• Functions: Depth/temperature
• Housing depth rating: Submersible to 33' (10 m)
• Manual mode: Output rate equal to ping rate
• Maximum depth reading: 656' (200 m), limited in manual mode
• Minimum depth reading: 15.75" (0.4 m), limited in manual mode
• Mounting: Pole mount capable for portable installations
• Operating temp range: -5° to +60° C
• Power and data cable: ER SS510: C304, 4 twisted pairs with TPR jacket
• Power supply voltage: 9 to 40V DC, regulated
• Reverse polarity protection: Yes
• Stem thread: 1/2"-14 NPS
• Storage temperature range: -22 to 158° F (-30 to 70° C)
• Weight: 2.8 lb (1.3 kg)

Installation Instructions