B&G ZG100 External GPS with Heading Sensor - 000-11048-002

B&G's ZG100 is a highly accurate, 10Hz GPS antenna that provides dependable and precise positioning information during acceleration and maneuvering; perfect partner for B&G chartplotters and instrument systems.

Features:

• Provides magnetic heading for accurate boat direction at any speed and for radar / chart overlay
• Precision position receiver and heading sensor in rugged, NMEA-2000 compatible external antenna module
• 10Hz GPS/GLONASS updates for smooth and accurate location
• Integrated Electronic Compass for exact vessel orientation and COG
• Compact and integrated position + heading antenna
• NMEA 2000 compatible: micro-C connector with 4' pigtail cable, pole mount
• Positioning: supports GPS and GLONASS (Galileo-ready with future software update) and WAAS/EGNOS/MSAS differential correction
• Integrated eCompass / Gyro
• 10Hz position and heading update rates
• NMEA 2000 antenna module enables flexible boat location for ideal positioning and best performance, and independent source selection on any display
• Improved time to first fix, position accuracy and reliability and with combination of GPS and GLONASS satellite signals
• Integrated electronic compass provides chart stabilization, accurate course over ground at low speed, and radar overlay on chart
  • Please note this product is not suitable for use with MARPA or autopilot systems, this requires a rate compass such as Gimballed Rate Compass (BGH330001)
• High speed update (10 times per second) provides smooth performance, and the most 'up-to-date' information
• Point-1 is compatible with combos and chartplotters in the following Series:
  • All Zeus, Including Zeus Touch

Specifications:

• Power Supply (Supply Voltage): 9V DC -18V DC
• Reverse Polarity Protection: Yes
• GPS Position Accuracy [m]: 5
• GPS Receiver Channels 32
• Rate of Turn: 3 degrees
• Satellite Reacquisition: 5 sec
• Time To First Fix from cold [s]: 50
• Dimensions: 90 mm x 133 mm

In the Box:

• Antenna
• 6 Foot Extension cable
• (1) T-connector
• SPAT/Pole mount
• Gasket
• Mounting hardware
• Install guide

Note: This heading sensor is not recommended for MARPA or Autopilot control! Please use the RC42 or RC42N for this.