Blue Sea Systems Gen II P12 Series Battery Charger
$772.84 - $978.04
Blue Sea Systems Gen II P12 Series Battery Charger Item # 862619
Description
The 25A Blue Sea Systems Gen II P12 Series Battery Charger is a 4-stage, 3-output charger housed in a rugged aluminum case. This charger is reliable, easy to use, and provides a broad range of easily understood fault communications and operating history.
Features:
- Four stage, three-output charger
- Rugged aluminum case
- Designed, assembled, and tested in the USA
- Pre-Float stage helps to prevent overcharging
- Distributed Battery Technology
- Can deliver 100% of available amps to any one bank if needed
- User can specify maximum output allowing for purchase of a charger larger than currently needed in anticipation of future additional battery banks
- Reliability
- Rugged finned aluminum case dissipates heat to help keep the battery charger electronics cool
- Universal line voltage 115230V AC, 4565 Hz for use anywhere, and is compatible with low voltage power sources
- AC over and under voltage shut down and automatic restart
- Ease of use
- Large bright full graphic control screen with user interface
- Plain-language text in English, French, Italian, German and Spanish
- Charge Coordination integrates with Blue Sea Systems Automatic Charging Relays to separate the battery banks while the P12 is operational
- Support
- Intuitive diagnostic screens provide a broad range of easily understood fault communications and operating history
Specifications:
- Certified: CE
- Temp Sensor: Bare wire
- Total Output Current: 25 or 40A
- Maximum Output Voltage: 16.0V DC
- Nominal Voltage: 12V DC
- Number of Outputs: (1) Negative and (3) Positive
- Universal AC Input Voltage: 115-230V AC
- AC Input Frequency: 45-65 Hz
- Output Voltage Accuracy: 0.05V
- Minimum Operating Temperature: -20° C
- Maximum Operating Temperature: 70° C
- Minimum Storage Temperature: -30° C
- Maximum Storage Temperature: 80° C
- Maximum Parasitic Current: 2 mA
- Battery Types:
- AGM
- Flooded
- Lead Acid
- Gel
- TPPL (Thin Plate Pure Lead)
- Warranty: 5 Years
- Dimensions:
- Height 13.03" (330.96 mm)
- Width 8.46" (214.88 mm)
- Depth 3.66" (92.96 mm)
- Stages:
- Bulk
- Absorption
- Pre-Float
- Float