Blue Sea Systems SI-ACR Automatic Charging Relay with Start Isolation - 7610

The Blue Sea Systems SI-ACR Automatic Charging Relay with Start Isolation automatically combines batteries during charging and isolates batteries when discharging and when starting engines. Start Isolation (SI) protects sensitive electronics by temporarily isolating house loads from engine circuit during engine cranking protects house circuit from voltage sags and spikes

Features:

• Automatically combines batteries during charging
• Automatically isolates batteries when discharging and when starting engines
• Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics start isolation (SI) indicated by blinking LED
• Supports high-output alternators up to 120A
• Ignition protected safe for installation aboard gasoline powered boats
• LED light is On when batteries are combined
• Under voltage lockout will not close when lower battery is below 9.5V @ 12V System or 19V @ 24V System lockout indicated by blinking LED
• Hermetically sealed contacts, vapor-proof
• Dual Sensingsenses charge source on either battery bank
• Designed for 12 or 24V systems 12/24V auto-ranging voltage input
• Remote LED output indicates relay state away from ACR unit

Specifications:

• Blue Sea Systems Model No. 7610
• Voltage: 12/24V DC
• Amperage: 120A (continuous)/210A (intermittent)
• Max. Cable Size: 1/0 AWG
• Waterproof rated IP67 temporary immersion for 30 minutes
• Meets ISO 8846, UL 1500 and SAE J1171 external ignition protection requirements

Data Sheet