Dr. LED Light Bar/Strip Light

The Dr. LED Light Bar/Strip Light is a motion controlled, dimmable, 12V light that is available in a 12" or 20" length.

Features:

• Non-Contact Infrared Motion-controlled On/Off/Dimming LED light bars
• Easy installation & operation
• Turns on to the last light setting
• Move your hand or finger across the sensor (within 1") to turn light on or off
  • Light turns on to the last intensity setting
  • While the light is on, hold your hand in front of the sensor to adjust light intensity
  • Maintain your position in front of the sensor to brighten or dim the light
  • Light will alternately brighten or dim

12" Light Bar Specifications:

• LED Color: Warm White, 2,700K
• Output: 280 Lumens
• Beam Angle: 150 Degrees
• Voltage: 12V DC
• Max Input Power: 5W
• Current Draw: 0.4A
• Motion-Sensor Idle Current: 0.01A
• Electrical Connection: 20" 22AWG UL2468 Pigtail (polarized barrel connector on one end, bare positive/negative wires on the other)
• Polarized Connection
• Operating Temperature: -4° F to 140° F (-20° C to +60° C)
• Water Ingress Rating: IP20
• Finish Color: Silver
• Mounting Hardware: Stainless snap-on brackets, pigtail
• Dimensions (L x W x H): 11.8" x 1.2" x 0.5"
• Weight: 2.8 oz

20" Light Bar Specifications:

• LED Color: Warm White, 2,700K
• Output: 430 Lumens
• Beam Angle: 150 Degrees
• Voltage: 12V DC
• Max Input Power: 7.2W
• Current Draw: 0.6A
• Motion-Sensor Idle Current: 0.01A
• Electrical Connection: 20" 22AWG UL2468 Pigtail (polarized barrel connector on one end, bare positive/negative wires on the other)
• Polarized Connection
• Operating Temperature: -4° F to 140° F (-20° C to +60° C)
• Water Ingress Rating: IP20
• Finish Color: Silver
• Mounting Hardware: Stainless snap-on brackets, pigtail
• Dimensions (L x W x H): 19.7" x 1.2" x 0.5"
• Weight: 4.7 oz

Dr. LED Conversion Guide (1.55 MB)