Egis Mobile Electric TDR Series Dual Output Time Delay Relay - 7616

This 12V dual-time relay can prevent dead batteries due to added equipment loads on after-engine stops or from multiple systems connected to a battery with an independent keep-alive power draw, maximizing operational readiness.

Features:

• Accessible after installation, for programming time delay and determining active features. Protected by self-retained cover
• 100% Non-ferrous corrosion-resistant materials. All attachment screws and nuts are self-locking
• Rapid and 100% correct assembly via Molex MX-150 connector eliminates poor field connections
• The mating plugs with 2" of the ground and ignition wire included. Optional harnesses with additional outputs and alternate wire lengths are available
• Optional EasyLink bus bars reduce the space and cost of connecting TDRs with CT or RT series Fuse Blocks
• Indicates a pending relay OFF event due to under/over voltage or external off trigger. Output on/off status is also provided
• Eliminates vehicle downtime due to dead batteries; the lowest off-state current draw (1.3 mA) is available
• Simple and robust Installation - Sealed plug with optional long wire leads; Single device replaces multiple control units and high-amp replays reduce installation time, costs, and points of potential failure
• Additional low-amp output can be used to maintain 24-hour memory circuits or to direct other equipment to shut down
• Bullet-proof construction - Sealed unit and high-temperature materials allow mounting anywhere on the vehicle; Integrated thermal overload protection as well
• Meets stringent OEM standards for electrical transient self-protection
• Adjustable OFF Time Delay - 0 seconds to 4 hours
• Kill Switch control input option for ensuring loads are not inadvertently on, maintenance/servicing of vehicles, and emergency OFF
• Flexible control options via ignition key, alternator voltage sense, or both

Specifications:

• Maximum Current: Continuous: 80A DC per Output (160A Total); Intermittent: 120A DC (5 Minutes) per Output
• Off-State Current Draw: 1.5 mA (less than 1 Amp-hr battery dissipation per month of stand-by)
• Voltage: 12V DC Nominal (8 - 18V DC)
• Temperature: -40 to 85 °C
• Time Delay Options: 5 Sec through 4 hours via Dip Switches
• Waterproof: IP66 (IP6K9K)
• Ignition Protected: ISO 8846

Guide