Furuno Dedicated Interswitch Hub - HUB101

The Furuno HUB101 Dedicated Interswitch Hub is the center of your NavNet 3D by connecting all onboard displays and components together. This allows for the distribution of information across the network.

Features:

• The Ethernet HUB uses an Ethernet interface (100BASE-TX/10BASE-T) to provide the network communication among the NavNet 3D equipment's, and PC
• Eight ports are provided on this HUB
• Three HUB-101 can be installed in a LAN series
• Power on/off synchronization among all of the NavNet 3D display units can be achieved with the use of this dedicated Ethernet HUB101
• Mounting: The Hub can be mounted on a desktop or a bulkhead
• When choosing a mounting location for desktop or bulkhead mounting, keep in mind the following points:
  • Locate the unit well away from areas subject to water splash and rain
  • Keep the unit out of direct sunlight because of heat that can build up inside the cabinet

Specifications:

• Transmission speed Half-duplex/Full-duplex: 10 Mbps/100 Mbps
• I/O Ports8 ports
• Environmental conditions:
  • Ambient temperature: -15 to 55° C
  • Relative humidity: 93% (at 40° C)
  • EMC: IEC 60945 Ed.4
  • Dustproofing, waterproofingIP20 (IEC 60529)
• Power supply: 12-24V DC
• Draw: 0.5-0.25A
• Body color: N2.5

In the Box:

• Ethernet HUB - HUB-101
• LAN cable (for connection with NavNet 3D equipment)
• Power cable assembly
• Self-tapping screws (Type: 3 x 20)
• 1.5A Fuses (2)
  • Fuse Type: FGMB 125V, 1.5 A PBF

Installation Guide