Go Power Pure Sine Wave Inverter - 400W - GP-ISW400-12

Go Power GP-ISW400-12 Pure Sine Inverter provides premium mobile power in a sleek, lightweight profile. It produces an exact replica of AC power for optimal performance. This inverter outputs 400W (continuous) and is a good choice for small, sensitive electronics.

Features:

• Bring reliable, UL-certified power on the road with Go Power!'s Industrial Pure Sine Wave Inverter
• Produces an exact replica of AC power for optimal performance
• Runs any device in wattage range without interference
• Durable, low profile design
• Powersave mode
• Dual GFCI outlets
• Wide voltage range
• Full overload protection

Mounting Notes:

• Make sure the GP-ISW400 is installed in a location where the normal air temperature is between -20° C and 40° C. The cooler the better within this range
• Do not allow water or other fluids to come into contact with the GP-ISW. Do not expose to rain, snow or water

Specifications:

• Input:
  • Voltage: 12V DC
  • Voltage Range: 10.0 - 16.0V DC
  • No Load Current: < 1 Amp
  • Power Saving Mode: < 0.12 Amp
  • Efficiency: (Typ.) 89%
  • On Mode @ Save Mode: < 0.12 Amp
  • On Mode @ No Load Mode: < 0.5 Amp
• Output
  • Continuous Output Power: 400W
  • Over Rated Power: (3 Min.) 460W
  • Surge Power: 800W
  • Frequency: 50 / 60 Hz ± 0.5% (Dip Switch Selectable)
  • Output Voltage: 100 / 110 / 115 / 120V AC ± 5% (Dip Switch Selectable)
  • Short-Circuit Protection: 2 seconds and restart 3 times shutdown
  • Output: Waveform Pure Sine Wave (THD < 3% @ Normal Load)
• Protection
  • Input Over-Voltage Protection: 16.0V DC ± 3%
  • Input Under-Voltage Protection: 10.0V DC ±
  • BAT. Low Shutdown: 10.0V DC ± 3%
  • BAT. Low Alarm: 10.5V DC ± 3%
  • BAT. Low Restart: 12.5V DC ± 3% 2
  • BAT. High Alarm: 15.5V DC ± 3%
  • BAT. High Shutdown: 16.0V DC ± 3%
  • BAT. High Restart: 14.5V DC ± 3%
• Environment
  • Working Temp.: -20° C - 60° C
  • Storage Temp.: -30° C - 70° C
  • Working Humidity: 10~95% RH, non condensing
• Safety & EMC Safety Standards
  • EMC standards: Certified FCC class B
• Dimension (WxHxD): 150 mm x 68mm x 187 mm
• Weight: 1.6kg
• Remote Control: CR-8 (Optional - Sold Separately)
• Cooling: Temperature & Load Controlled cooling Fan

In the Box:

• Go Power GP-ISW200-12 Pure Sine Inverter
• 2 x Ring terminals

Product Data Sheet (1.72 MB)

Owner's Manual and Installation Guide (2.85 MB)