Harken Protexit Double Exit Block - 30 mm (1 3/16") - 1201

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit's all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There's more: Protexit blocks offer higher working loads than any small boat exit blocks we've ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don't deform in extreme conditions, while reducing wear on the halyard, too. Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

Specifications:

• Length: 3 13/16" (97 mm)
• Sheave Diameter: 1 3/16" (30 m)
• Weight: 57 g (2 oz)
• Fasteners: 5 mm FH
• Fastener Spacing: 79 mm
• Maximum Working Load: 250 kg (550 lbs)
• Breaking Load: 500 kg (1103 lbs)

Dimensions:

• A: 18.2 mm
• B: 70.1 mm