Hubbell Reverse Service Insulgrip Pin and Sleeve Inlet - 200A - M5200BS1R

Different from traditional all-metallic devices, Hubbell Pin and Sleeve wiring devices are designed to provide metallic shrouding where you want it and a non-metallic housing where you need it. What's more, Hubbell's watertight Insulgrip Pin and Sleeve wiring devices are designed with safety first and foremost. Hubbell created the line with plant facility maintenance personnel and a safer industrial work environment in mind. To greatly reduce the likelihood of electrical shock, they developed their exclusive non-metallic watertight system, meaning that with Hubbell on the job, the mix of electricity and water isn't the threat it once was. So, whether the job calls for a welding outlet in a dry location or a motor disconnect in a wet location, step up to Hubbell Pin and Sleeve wiring devices.

Features:

• Watertight neoprene sealing glands for reliable seal
• Spring-Loaded, gasketed cover for dust-tight seal
• Pin chamber confines arcing within the interior chamber

Specifications:

• Application: Metallic with nylon shroud
• Environmental Conditions: Watertight
• EU RoHS Indicator: Yes
• Item Type: Single flanged-reversed
• Material: Thermoplastic
• Mounting Hardware: Screw mounting
• Number of Poles: 4-Pole
• Series: UL 1686 Class 1 Insulgrip®
• Style: Reversed service, corrosion resistant
• Type: Watertight Receptacle
• Amperage Rating: 200A
• Connectivity: Pressure Terminal Screws
• Current Rating: 200A
• Phase: Three Phase
• Voltage Rating: 600V AC/250V DC
• Wattage: 120000W
• Number of Wires: 5-Wire
• Wire Size: #2 AWG to #4/0 AWG
• Operating Temperatures:
  • Maximum Continuous: 75°C
  • Minimum: -40 °C without impact, -25 °C with impact

Performance:

• Electrical:
  • Current Interrupting: Certified for current interrupting at full rated current
  • Dielectric Voltage: Withstands 3,000V AC
  • Max. Working Voltage: 600V AC RMS
• Environmental:
  • Flammability (Enclosure): UL 94V-0 and CSA C22.2 No. 0.17
  • Moisture Resistance - Type 3, 4, 4X per UL 50E and CSA 22.2, No. 94
• Mechanical:
  • Impact Resistance: Per CSA C22.2, No. 182.1, UL 1682
  • Product Identification: Identification and ratings are permanently fastened to the device housing
  • Terminal Identification: Terminals identified in accordance with UL 1686(1, 2, 3, Green)

Certifications and Compliance:

• CSA Certified to CSA Spec. C22.2 No. 182.1
• UL Listed and CSA Certified Type 4X
• UL Standard 1682
• NEMA Rating: Non-NEMA
• RoHS Compliance Status: CM

Installation Instructions

Dimensional Drawing