Jabsco 2620-Series Pedestal Mount Engine Cooling Water Pump - 2620-1101

Features:

• Jabsco 2620-1101 Pedestal Mount Engine Cooling Water Pump
• Constructed from marine quality bronze and stainless steel for ruggedness and reliability
• Easy to service and maintain
• Inexpensive to buy and operate
• Handles hard and soft solids without clogging
• Able to pump in either direction
• Will not airlock

Specifications:

• Bronze FIP Pedestal Water Pump
• 3/8" NPTF Engine Cooling Pump
• Size: 020
• Flow Rate: Nominal 20 L/min (4.4 Gal/min) at 1500 rpm
• Self-priming from dry up to 1.5 m (4.9')
• Do not run dry for more than 30 seconds
• Body Materials Bronze
• Impeller: Neoprene
• Shaft Material: 316 Stainless Steel
• Seal: Mechanical Seal
• Bearings Sealed Ball Bearings
• Port Type 3/8" NPT (Female) Internal
• Marine Applications:
  • Engine cooling
  • Pumping bilges
  • Washdowns
  • Circulating water in bait tanks
  • Utility dock side pump

Other Applications:

• INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerin, Brine, etc.;
• FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires. ;
• PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools

Available Models:

• 2620-1101 – Mechanical Seal, Neoprene Impeller (This Model)
• 2620-1001 – Lip Seal, Neoprene Impeller (Special Order)
• 2620-1103 - Mechanical Seal, Nitrile Impeller (Oil Resistant) (Special Order)

Data Sheet