Johnson Viking Power 16 Waste Water Pump - 10-13350-03

Features :

• Compact shower drain, bilge and waste water pump
• Specifically designed to pump waste water, the Viking Power 16 is an ultra-modern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations
• Perfect for installation in tight spaces, the Viking Power 16 can be installed anywhere after the drain outlet in the wastewater system or as a bilge pump
• Compact, robust and adaptable the Viking Power 16 has KlickTite XL connectors fitted as standard, literally making hose connections a snap
• Includes:
  • 1" and 3/4" Hose Connectors
  • 1/2" BSP (NPT) Hose Connectors (threads: straight)
  • KlickTite™ XL Hose Connectors
• The Viking Power 16 features non-choke valves, which means that no in-line filters are necessary
• The pump can not only be run dry, it can also handle a mixture of air and water without difficulty
• The Viking Power 16 is self-priming up to a height of 3 meters
• With its low pulse and muffled rubber bracket, this pump offers quiet operation
• The Viking Power 16 has been built to last, and engineered for easy maintenance
• When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system
• Specially designed to pump waste water
• Easy to install, even in tight spaces
• Quiet operation
• Easy, low-cost maintenance
• High-impact fiberglass reinforced nylon body
• Ball-bearing supported transmission
• Non-choke valves - no filters required
• Self-priming up to 3 m (9.8 feet)
• Can be run dry and can pump air/water mixture
• Robust single diaphragm KlickTite XL connectors standard
• 12 VDC Motor
• Low power consumption
• Complies with ISO15083 small craft bilge pump standards for vessels up to 12 m (39.4 feet)

Specifications:

• Capacity: 16 L/min (4.5 GPM) open flow (15 L/min at 0.1 bar)
• Max. head: 3 m (9.8 feet)
• Max. lift: 3 m (9.8 feet)
• Max. head&lift: 4 m (13.1 feet)
• Dimensions: 186 mm long x 235/181 mm wide x 118/204 mm high (7.3" x 9.3/7.1" x 4.6/8")
• Motor: 40W at 1 m head, 12 VDC (with built-in thermal protector)
• Pump body: Nylon, fiberglass reinforced
• Valves: Nitrile rubber
• Diaphragm: Reinforced nitrile rubber
• Voltage: 12V DC
• Hose connection: KlickTite XL Connectors for 1" & 3/4" hose and 1/2" BSP (NPT)
  • Threads: Straight
• Optional 90 Degree Fittings: (Sold Separately)
  • 09-47503 3/4" Hose barb
  • 09-47502 1" Hose barb