Johnson Viking Power 32 Waste Water Pump - 10-13373-03

A modern, heavy duty, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft – new or used. Thanks to its single-chamber design and non-choke valves, the Viking Power 32, can be used to pump un-macerated sewage to a holding tank or transfer it onwards to a septic tank.

Features:

• Maximum flow 32 L (8.5 gal) per minute
• Specifically engineered to pump black wastewater
• Uncompromising odor-prevention features
• Whisper quiet operation
• Self-priming
• High-impact glass-fiber reinforced nylon body
• Ball-bearing supported transmission
• Non-choke valves, no waste shredding required
• Pump head rotatable 360 deg
• Self-priming up to 2.5 m (8.2')
• Can be run dry and can pump air/water mixture
• Robust single diaphragm
• Electric motor with power-out, manual-crank backup
• Complies with ISO 15083 and small craft bilge pump
• Standard for vessels above 12 m (39.4')

Specifications:

• Motor: 3.3A/12V at 0.1 BAR with built-in thermal protection
• Body: Nylon
• Valves: Nitrile rubber
• Diaphragm: Reinforced nitrile rubber
• Open Flow Capacity: 32 L (8.5 gal) per minute
• Capacity at 1 BAR: 30 L (7.9 gal) per minute
• Max Lift: 2.5 m (8.2')
• Max Head: 4 m (13.1')
• Connection: 38 mm (1 1/2")
• Voltage: 12V
• Fuse: 12A