Lectrotab Retrofit Automatic Level Control for Bennett/Lenco Systems

Lectrotab's Retrofit Automatic Level Control is designed to upgrade or replace an Automatic Control Switch while reusing the original auto leveling control wiring.

Features:

• Microprocessor based automatic leveling trim tab control
• ALC-1D/ALC-2D designed for planing and semi displacement hulls larger than 20'
• ALC-2S designed for use as a second station keypad only
• LED tab position indicators
• Automatically starts correcting attitude during acceleration
• Adapts to varying sea conditions: controls roll and pitch automatically
• Prevents automatic corrections while turning
• When reducing speeds below planing speed, the ALC will not attempt to control attitude
• Internal GPS - no GPS antenna or network required
• Completely sealed and waterproof (IP68)
• UV protected - will not deteriorate in sunlight
• Automatically dims LED tab position indicators in darkness and brightens in sunlight
• Automatically retracts trim tabs when boat is off plane or using optional key switch connection
• Designed for 12 and 24V DC electrical systems
• Dual station operation available (ALC-1D and ALC-2D does require external power module)
• Made in USA

ALC-1D Specifications:

• Display color: Black
• Number of stations: 1 or 2
• Actuators per tab plate: 1
• Dimensions: 3.15" x 3" x 0.437" (80 x 77 x 11 mm)
• Mounting hole cutout (Dia.): 2" (50 mm)
• Voltage: 12/24V DC
• Fuse size power input (1 actuator per tab):
  • 12V DC = 15A
  • 24V DC = 10A

ALC-2D Specifications:

• Display color: Black
• Number of stations: 1 or 2
• Actuators per tab plate: 2
• Dimensions: 3.15" x 3" x 0.437" (80 x 77 x 11 mm)
• Mounting hole cutout (Dia.): 2" (50 mm)
• Voltage: 12/24V DC
• Fuse size power input (2 actuators per tab):
  • 12V DC = 30A
  • 24V DC = 20A

Owner's Manual

Product Brochure (1.84 MB)