Lowrance StructureScan 3D Module with Transducer - 000-12395-001

Lowrance's StructureScan® 3D allows anglers to see fish, structure and bottom contour in a stunning three-dimensional view. StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high-resolution, 180-degree, three-dimensional view beneath your boat. With this unique imaging view, anglers gain a better understanding of where fish and structure are located in relation to their boat.

Features:

• The picture-like, three-dimensional views are displayed on the Lowrance HDS Gen3 series of fishfinder/chartplotters, when used in combination with the SideScan 3D Skimmer® transducer and StructureScan® 3D module
• Easy-to-Understand Sonar Images
• View 3D images from any angle with ScanTrack™ pan-tilt-rotate control using on-screen touch commands and easy-to-use, preset viewing positions
• StructureScan® 3D allows anglers to more easily understand where fish and fish-holding structure are located in relation to their boat
• 180-Degree scanning range, anglers can quickly search for key areas and cover, such as abrupt depth changes, points, ditches, rock piles, brush piles, weed beds standing timber, wrecks and more
• Clearest possible SideScan views, the StructureScan 3D transducer design has been enhanced with an increased number of sensors for greater imaging performance
• High Definition (HD) and Super-Wide 3D Scanning contours below the water's surface can be shown to the sides of the boat (up to 600 feet port and starboard) with incredibly detailed, high-definition views
• Leading Edge™ scanning reference provides a clear graphical illustration of sonar beams as they intersect with bottom contours
• SelectScan™ automatically shades fish-holding cover and suspended targets in a color that contrasts the selected color palette
• Vertical Enhancement is a user-selectable scale that will apply on-screen emphasis to vertical drops and crucial depth contour changes
• Use the waypoint keypad to save a waypoint at the boat location, or switch to cursor mode, and save a waypoint over specific targets, baitfish or cover
• Fine-tuned 3D image settings are set by your HDS Gen 3 default configuration and StructureScan 3D Module
• Ethernet Connectivity allowd connectivity for up to (3) networked devices

Specifications:

• Transmit Power Max RMS: 500W
• Cable Length 20 ft / 6m
• Transducer Frequencies Enhanced 455 kHz
• Sonar: 600 feet
• echosounder Frequencies Enhanced 455 kHz
• EchoSounder Output Power Max RMS: 500W
• SideScan Imaging
  • Max Range: 600 ft. / 183 m
  • Track bottom: 35 mph / 56 kph
  • Mark objects: 15 mph / 24 kph
  • Optimum imaging: 2-8 mph / 3-13 kph
• DownScan Imaging™
  • Max Depth: 300 ft / 92 m
  • Track bottom: 35 mph / 56 kph
  • Mark objects: 2-8 mph / 3-13 kph
  • Optimum imaging: 2-8 mph / 3-13 kph
• Power Consumption:
  • Max: 0.75 Amp
  • Typical: 0.60 Amp
  • Inrush: 4.7 Amp pk
• Power Supply (Supply Voltage) 12V DC
• Input Voltage 10V - 17V DC
• Cable: 20 ft / 6 meter
• Waterproof: IPX 7

Package Includes:

• 000-12396-001 StructureScan 3D Transducer
• 000-12397-001 StructureScan 3D Module
• 000-00128-001 Power Cable
• 000-0127-29 Ethernet cable (yellow 5 Pin) 4.5 m (15 ft)

Installation Instructions

Transducer Installation Instructions