March LC-2M-MD Submersible Magnetic Drive Pump
Item: #2224759 | Part Number: Not Selected
March LC-2M-MD Submersible Magnetic Drive Pump Item # 2224759
Description
March Pump's LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump ideal for marine applications. It is capable of generating a maximum flow of 5 gal per minute at 1', and its maximum head is 13' (5.5 PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is ignition protected per SAE J1171 and ISO 8846. It is capable of 12,000 BTU an hour.
March C and CP series magnetic-drive pumps have long been trusted for marine seawater circulation thanks to their reliable seal-less centrifugal design. New M-series pumps were designed with marine specific improvements including enhanced corrosion protection, extended run-dry protection, and standardized configurations for continuous sea water and fresh water circulation systems.
Specifications:
- Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
- Inlet: 3/8" FPT and 3/4" MPT
- Outlet: 1/4" MPT
- Submersible: Yes
- Uses: Submersible or open air
- Max Internal Pressure: 25 PSI / 1.7 bar
- Max Internal Temperature: 130° F (54° C)
- Ignition Protected per SAE J1171 and ISO 8846: Rated IP67
- Wet End Materials:
- Polypropylene (front housing, impeller)
- Nylon (rear housing)
- Viton (O-ring)
- Buna-N (O-ring, cooling tube seal)
- 316 stainless steel (shaft, cooling tube)
- Ceramic (thrust washer)
- Ceramic magnet
- 50 Hz:
- Max Flow: 4.9 GPM / 294 GPH (18.5 LPM / 1110 LPH)
- Max Head: 8.9' (2.7 m)
- Power: 0.018 HP (0.014 kW)
- 60 Hz:
- Max Flow: 5 GPM / 300 GPH (18.9 LPM / 1134 LPH)
- Max Head: 13' (4 m)
- Power: 0.02 HP (0.015 kW)
Replaces:
- March Pump LC-2C-MD:
- 115V Model: 0125-0057-0400
- 230V Model: 0125-0057-0500
Notes:
- This pump is not self-priming, a non-self-priming pump cannot remove air from its suction line by itself and must already be filled with liquid before it can move fluid:
- Starting the pump dry may cause it to overheat, cause damage to seals or internal components, and will not move water
- It is recommended to use a water strainer with this pump (not included)
- Images are for reference only, actual product may vary