Newmar Digital Energy Monitor - 2.5" - DCE

The DCE provides accurate low cost instrumentation for 3 banks of batteries between 9.5 and 33V. The unit displays voltage for three banks and amps or amp hours for your house bank. It tracks all current entering and leaving the house bank and applies Peukert's and efficiency factors. You can set Low and High voltage alarms and Low Ah Remaining alarms on the house bank. When activated, the built-in 85 dB alarm will sound and the display will flash. The DCE outputs NMEA 0183 serial data or the data line can be programmed as an external alarm output or as a charger on-off control. Five levels of backlighting can be selected and all set-up, calibration constants and alarm values are saved to non-volatile memory. The DCE comes complete with a precision 500A shunt and is designed to work with 50-500A 50mV shunts. (Unit must be recalibrated if other than 500A shunt is used.)

Owner's Manual (1.06 MB)