Newmar Battery Integrator

The Newmar Battery Integrator automatically connects multiple battery banks during charging to ensure efficient power distribution without voltage drop. It isolates batteries when not charging, preventing unwanted discharge and allowing selective use.

Features:

• Automatically connects batteries only when charging voltage is detected to prevent cross-drain
• Heavy-duty silver-plated contactors rated for continuous 100A or 200A current depending on model
• Epoxy-encapsulated voltage sensing and solenoids designed for durability in harsh environments
• Supports remote activation for starter boost via key or manual switch integration
• Ignition protection available on 12V 100A model for enhanced safety
• Simple three-wire installation for two-bank systems with clear terminal designations
• Includes terminal for optional remote indicator light to show battery integration status
• Prevents voltage drop while maintaining full isolation between battery banks when idle
• Expandable for systems with three or more banks by adding additional units

Specifications:

• Battery Connection Terminals: 5/16" Copper Alloy Stud
• 12V Integration Voltage: 13.2V DC
• 12V Disconnect Voltage: 12.8V DC
• 24V Integration Voltage: 26.4V DC
• 24V Disconnect Voltage: 25.6V DC
• Max Continuous Current: 100A (12V/24V), 200A (12V)
• Peak Current Rating: 400A (100A Models), 600A (200A Model)
• Operating Temperature (Control): -40 to 85°C
• Operating Temperature (Solenoid): -28 to 48°C
• Dimensions (100A Models): 3" x 3.25" x 2.5"
• Dimensions (200A Model): 4" x 3.3" x 4.1"
• Weight: 1 lbs (100A), 2 lbs (200A)
• Certifications: CE Marked