Pettit Antifouling Bottom Paint for Inflatable Boats - 1841Q

Pettit Ablative Antifouling Paint for Inflatable Boats is a water-based coating designed to protect against all types of marine and fresh water fouling.

Features:

• Contains cuprous oxide for aggressive antifouling protection against algae, barnacles, grass, zebra mussels and more
• Contains PTFE for reduced drag, maximum speed and efficiency
• Complies with all VOC regulations
• Resists cracking, peeling and flaking
• Withstands frequent trailering, beaching and launching
• Easy application and cleanup

Specifications:

• Type: Ablative
• Active Ingredient: 25.25% Cuprous oxide
• Finish: Flat
• Color: 1841 Black
• Curing Mechanism: Solvent release
• Coverage: 430 sq. ft./gal
• VOC: 150 g/l max. (1.25 lbs/gal)
• Flashpoint: None
• Application Data:
  • Methods: Brush, roller, airless or conventional spray
  • Number of Coats: 2 minimum with additional coat at waterline recommended
  • Dry Film Thickness per Coat: 1.5 mils
  • Wet Film Thickness per Coat: 3.75 mils
  • Temperature Range: 50° F. Min. / 90° F. Max
  • Do not apply if temperature will fall below 50°F within 6 hours of application
  • Humidity Range: 0% Min. / 85% Max
  • Dry Times (Hours)
    • To Touch, To Recoat, To Launch
    • @ 90° F.: 1/4, 1, 12
    • @ 70° F.: 1/2, 2, 16
    • @ 50° F.: 1, 4, 48
• There is no maximum drying time before launching
• THINNER: 140 Water Based Brushing Thinner

See Data Sheet for This Product

Safety Data Sheet