Propspeed Stripspeed Coating Remover - 1 L - SS501

Developed to help Propspeed applicators to prepare metal surfaces for reapplication, Stripspeed removes foul-release coatings in 30 minutes or less (Timing is subject to atmospheric conditions. Ideal temperature is 15 °C to 27 °C (60 °F to 80 °F). The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Just shake, pour and go. Stripspeed is non-flammable, non-caustic, DCM and NMP free. Unlike grinding or using abrasives, Stripspeed doesn't cause mechanical wear through multiple refits, and doesn't create airborne particles or debris, increasing the lifetime of the metal.

Save time and money on Propspeed applications with Stripspeed!

Features:

• Easy to Use: Easy to apply, easy to remove. Scrape and then scrub with an abrasive pad
• Strips Swiftly: Stripspeed works within 30 minutes or less, speeding up the Propspeed removal process
• Apply at Any Angle: Stripspeed's unique formula can be applied at any angle without sliding off
• No Airborne Particles: With no grinding required, there will be no airborne particles, making Propspeed removal harmless

Specifications:

• Solvent: Aromatic blend
• Physical State: Gel/Liquid
• Appearance: Creamy
• Odour: Vinegar
• Theoretical Coverage: 2 sq. m./L
• Shelf life: 36 months
• PH: Acidic
• VOC: 768 g/L (6.41 lbs/gal) as supplied (EPA Method 24). These may be subject to variation due to manufacturing tolerances.

Stripspeed Technical Data Sheet

Stripspeed Safety Data Sheet