Welcome to Defender Canada! 
Raritan C.H. Cleans Hoses - 1PCHGAL Item # 878479
Description
Raritan C.H. (Clean Hose) is a must have for all boatyards, marine plumbers, marinas and boat owners. It's non-toxic, biodegradable and safe to use with all materials commonly found in black water systems. C.H. is specifically designed to remove uric scale from the black water system from the toilet to the tank without having to remove hoses.
Features:
- Non-toxic, biodegradable and safe to use with all materials commonly found in black water systems
- C.H. is specifically designed to remove uric scale from black water system from the toilet to the tank without having to remove hoses
- Dissolves clogs which cause plumbing to overflow and create nasty odors
- Safe and effective replacement to the muriatic acid treatments recommended in Lectra/San and Electroscan waste treatment systems
- Increases electrode plate life in Lectra/San or Electroscan system if used every 6 months
- Container: (1) Gallon (Makes 6 Gallons)
Applications:
- Systems with holding tanks: Mix solution using a 1:5 mix (1 part Cleans-Hoses, 5 parts clean water). Pour solution into toilet and flush until a minimum of 3 gallons has made it to the holding tank. Allow mixture to sit in the hoses for at least 6 hours or a maximum of 24 hours. Flush toilet with plenty of clean water, 10 gallons or more, then pump out the holding tank and resume use of system. See tank cleaning instructions for cleaning holding tank.
- Tank cleaning: Fill tank with a Cleans-Hoses solution. Mix 1 part Cleans-Hoses to 5 parts clean water. Make certain all air gaps have been filled. For best result provide some means of agitation for 12-18 hours with either a compressed air line or utility pump. Pump out tank(s), then flush tank(s) with clean water and pump out again, before resuming use of the system
- Systems with Electroscan or Lectra/San: Flush the toilet 10 normal flushes to clear any residual chemicals. Mix solution using a 1:5 mix (1 part Cleans-Hoses, 5 parts clean water). Pour solution into toilet and flush until a minimum of 3 gallons has made it to the Lectra/San or Electroscan tank. Allow mixture to sit without activating the treatment system for at least 6 hours or a maximum of 24 hours. Flush toilet with plenty of clean water, 10 gallons or more, then resume use of system. (see Electroscan and Lectra/San manual for information on disabling the treatment system.)