Samlex EVO Pure Sine Inverter/Charger

Pure sine wave inverter, adaptive battery charger, transfer relay all in one unit. Samlex Evolution Series inverter/chargers provide reliable AC power wherever it's needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.

Features:

• AC Inputs:
  • Two separate AC inputs - one for grid (priority #1), one for generator (priority #2), connect simultaneously, no need to reconfigure when different power sources are available
  • Each AC input is programmable for voltage and frequency. User determines what the min and max thresholds are to switch from grid or generator to inverter
  • Generator start can be initiated by"Status Relay" contact, can be programmed to activate when grid is lost
• Solar Input:
  • Connect a solar charge controller directly to the EVO through the battery charger external DC input, seamlessly integrates solar charging into the EVO's power system
  • Online mode can be used to prioritize batteries/inverter over the grid, ideal for those wishing to operate primarily on solar power (when the grid is available, but might be costly)
• Battery Charger:
  • 3 or 4 stage charging with equalization (must be manually initiated)
  • Adaptive algorithm is used during bulk to assess the condition of the battery. Subsequent stages are then based on the condition of the battery rather than pre-set time periods for absorption and float. Prevents unnecessary charging, extends the life of batteries
  • Programmable - set battery voltage thresholds to initiate charging
• Transfer Switch:
  • Zero transfer time when switching from inverter to grid. When grid comes on, the inverter synchronizes with the wave form and then transfers instantly at zero crossing
  • Under 16ms transfer when going from grid to inverter. When grid is lost, the transfer relay switches to inverter at the correct place in the wave form
• Surge Capacity (Power Boost):
  • The EVO has 3X surge power
  • Additionally, the EVO has large power overload allowances available for long periods of time. Increased inverter capacity means you can size your inverter smaller to handle heavy surge loads, reducing costs
• State-of-the-Art Technology:
  • The EVO operates at 165 million instructions per second producing lightning fast load and response times
  • The EVO is practically indestructible. It has"Bullet-Proof Intelligence" in the form of 9 physical points of protection monitoring being scanned up to 10,000 times per second for adverse conditions. The EVO will detect fault conditions and initiate a healthy shutdown before any product damage can be done
  • The EVO-RC remote control (sold separately) can be used to capture detailed EVO performance data. Records all detected faults and the conditions leading up to them. Data is stored on a removable 32GB SD Card (in the remote). Use data to analyze trends for more efficient use of system resources
  • The EVO uses five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed

Specifications:

• EVO-3012:
  • Input: 12V DC
  • Output: 120V AC
  • Watts: 3000W
  • Surge: 9000W
  • Outlets: Hardwired
  • Fuse: External
  • Weight: 29 kg (63.9 lbs)
  • Dimensions: 325 mm x 426 mm x 207 mm (12.8" x 16.8" x 8.1")
• EVO-4024:
  • Input: 24V DC
  • Output: 120V AC
  • Watts: 4000W
  • Surge: 12000W
  • Outlets: Hardwired
  • Fuse: External
  • Weight: 29 kg (63.9 lbs)
  • Dimensions: 325 mm x 426 mm x 207 mm (12.8" x 16.8" x 8.1")

Product Manual (6.74 MB)

Quick Start Guide (1.03 MB)

Spec Sheet