SCAD Technologies Internal Tank Sensor - 10021

Ever have a float sensor foul and fail in a waste tank? The SCAD Technologies' PVC rod-style level sensor solves this problem, as it is a completely solid-state design with no moving parts to foul. This sensor installs through a 1" NPT threaded hole in the top of the tank to monitor. If your tank already had a float sensor installed there may already be a suitable hole through which to install this sensor. If this hole has 5 smaller holes surrounding a larger central hole it is likely that this is the standard SAE-5 lug sensor pattern for which SCAD Technologies manufactures an adapter plate which will greatly simplify your installation. (10029 Adapter Sold Separately)

Features:

• SCAD Technologies Clog Proof Internal Tank Sensor
• Applications: Requires a SCAD Solo or Profile Monitor Panel (1-8 Panels) (Sold Separately)
• Mount: Mounts Inside of Metal Tank (Metal Tank Only)
  • Requires a 1" NPT hole in top of tank (10029 SAE 5 to 1" NPT Adapter Sold Separately)
• Tank Types: Waste, Water, Fuel (Not for Diesel Fuel)
• Tank Depth: 6" to 24" (adjustable by cutting)
  • You will need to cut the sensor down to the proper length for your tank height and seal the sensor with the provided PVC cap and an appropriate PVC adhesive (not provided)
  • The sensor length should be about an inch or so shorter than the height of the tank

Note: This sensor is designed for use in metal tanks, wood-cored fiberglass tanks, or any plastic tank whose walls are unsuitable or inaccessible for installation of SCAD Technologies' external foil-based level sensors

Installation Guide