Welcome to Defender Canada! 
Description
The SHURflo Pump Head Kit 94-236-03 is a direct replacement designed to restore peak performance and reliability to compatible SHURflo 2088 Series pumps. Ideal for bench or field repairs, the kit includes a complete pump head assembly, gasket, and hardware for a straightforward installation. Keep your pump running smoothly with genuine SHURflo components.
SHURflo Pump Head Kit - 94-236-03 Item # 882953
Description
Shurflo Pump Head Kit – Shurflo pumps have set the standard for performance and reliability. To keep that performance and reliability at its peak, Shurflo offers a wide range of kits for bench and field repair of its products.
Compatibility:
- 2088 Series Silencer Deluxe, Premium
- 2088 Series Standard Blaster
- 2088 Series Pro Blaster Junior
- 2088 Series Pro Baitmaster Junior
Specifications:
- P/S: 3.5
- Cam: 3.5
- PSI: 45
Includes:
- Pump head unit
- (3) Screws
- (2) Heat shrink connectors
- Gasket
Replacement Instructions:
- Disassembly:
- Disconnect lead wires from pressure switch. Note which wire goes to each lead on the switch
- Remove the strain relief plug by pushing out on the plug from the motor side with a flat blade screwdriver. Pull the lead wires through the strainer relief
- Remove the three long screws . These screws hold the pump head assembly to the motor
- Remove the pump head
- Assembly:
- Place the new pump head on the motor shaft
- Put the three long screws in place and screw down until each touches; then tighten each screw securely
- Attach the lead wires onto switch
- Place the strain relief in original position