SHURflo Pump Head Kit - 94-236-14

Shurflo Pump Head Kit – Shurflo pumps have set the standard for performance and reliability. To keep that performance and reliability at its peak, Shurflo offers a wide range of kits for bench and field repair of its products.

Compatibility:

• 2088/2093 Series Silencer Premium
• 2088/2093 Series Standard Blaster
• 2088/2093 Series Pro Blaster Junior
• 2088/2093 Series Pro Baitmaster Junior

Specifications:

• P/S 3.0
• Cam: 3.0
• PSI: 45

Includes:

• Pump head unit
• (3) Screws
• (2) Heat shrink connectors
• Gasket

Replacement Instructions:

• Disassembly:
  • Disconnect lead wires from pressure switch. Note which wire goes to each lead on the switch
  • Remove the strain relief plug by pushing out on the plug from the motor side with a flat blade screwdriver. Pull the lead wires through the strainer relief
  • Remove the three long screws. These screws hold the pump head assembly to the motor
  • Remove the pump head
• Assembly:
  • Place the new pump head on the motor shaft
  • Put the three long screws in place and screw down until each touches; then tighten each screw securely
  • Attach the lead wires onto switch
  • Place the strain relief in original position