Siren Marine Siren 3 Pro Vessel Management Device - SM-S3P-917

The Siren 3 Pro is the most advanced Main Device Siren Marine offer. Together with the Siren Connected Boat App, the Smart Boat Monitoring System puts your boat in the palm of your hand 24/7.

Install the Siren 3 Pro on your boat to monitor and track multiple critical systems such as battery voltage, bilge pump activity, water levels, shore power status, engine performance, temperature, location and more right on the App. Some monitoring capabilities require a Siren 3 Series Wireless Sensor or Wired Sensor (not included).

Standard Features:

• Battery Monitoring: Monitor your boat's battery and receive alerts if voltage is low
• GPS Position/Geofence: Track boat's location and receive alerts on boat movement
• NMEA 2000: Best-in-class NMEA 2000 marine electronics backbone connectivity
• Digital Switching: Remotely control multifunction displays, lights, refrigerator and more
• LTE-M (4G/5G): The latest cellular technology connects you to your boat

Features with Add-On Sensors and Accessories:

• Engine Metrics: Monitor performance and support metrics for any NMEA propulsion system
• Connected Fluid Tanks: Monitor tank levels (i.e. fuel, water, etc.) and check level history
• Security/Entry: Add snap, motion and entry sensors for the ultimate boat security system
• Bilge: Monitor bilge activity, including bilge run time and daily bilge cycles
• High Water: Detect water and monitor water level in bilge
• Shore Power: Monitor shore power connection and receive power outage alerts
• Temperature: Monitor temperature of cabin, engine room, fridge and/or bait locker
• Satellite Compatible: SirenSat provides smart boat location and tracking when outside of cell range
• Wireless Sensors 3.0: Siren 3 Pro delivers improved wireless connectivity

Specifications:

• Dimensions: 6" x 4.5" x 2"
• Weight: 1 lbs
• Operating Voltage: 9 - 30V DC
• Internal Battery Type: 3000mAh Lithium Polymer Battery
• Internal Battery Backup Power: Up to 48 Hours Backup Power
• Firmware Upgradeability: Over the Air (OTA) for both Siren 3 Pro and wireless sensors
• Cellular: External Antenna, 4G/5G CAT-M1, with fall back to NB-IoT and EGPRS
• Wireless: External Antenna, Sub-GHz
• NMEA 2000: CAN Bus 1, M12 (5 Pin)
• Application-Dependent Protocol (ex. J1939): CAN Bus 2, M12 (5 Pin)
• Satellite Modem: RS-232, M12 (12 Pin) Wiring Cable #2
• Expansion Bus: RS-422. M12 (12 Pin) Wiring Cable #2
• Mounting: Snap-in bracket with (4) screws provided for mounting
• Positioning: Internal Antenna, GNSS, GPS/GLONASS with SBAS, (External antenna option available)
• Connectivity: Interface cable with mating connector of 1m length provided for wired inputs and outputs with 24 AWG conductors.
• Humidity: 0 to 90% RH
• Water & Dust Tolerance: IP67
• Environmental/Temperature (Operating):
  • 32° F to 113° F
  • 0° C to 45° C
• Environmental/Temperature (Storage):
  • 4°F to 140°F
  • 20°C to 60°C
• Certifications:
  • FCC Part 15, Subpart B, Class B
  • EN60945
  • CE
  • PTCRB
  • NMEA 2000
• Wired Sensor Inputs:
  • Battery 1
  • Battery 2
  • High Water 1
  • High Water 2
  • Security 1
  • Security 2
  • Security 3
  • Ignition
  • Battery Switch
  • Shore Power
  • Remote Arm/Disarm
• Wired Sensor Outputs:
  • Remote Battery Switch (#7713)
  • Relay Output 1
  • Relay Output 2
  • Relay Output 3
  • Relay Output 4
• Wireless Sensors:
  • Magnetic Reed Switch (Intrusion)
  • Bilge Pump Activity
  • Temperature
  • High Water
  • Battery Voltage

Product Brochure

Quick Guide (5.15 MB)

Installation Instructions (3.09 MB)