Victron Energy Lynx Smart Battery Management System NG

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

Features:

• Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch
• Battery monitor, indicating state of charge percentage and more data
• Pre-alarm signal provides a warning before the system shuts down due to, for example, a low cell
• Bluetooth for use with our VictronConnect app, for setup and monitoring, including Instant Readout - key data of the BMS at-a-glance.
• Local and remote monitoring using a Victron GX device (for example the Cerbo GX or Ekrano GX)

Power Specifications

• Battery Voltage Range: 9 - 60V DC
• Maximum Input Voltage: 75V DC
• Supported System Voltages: 12, 24, or 48V
• Reverse Polarity Protection: No
• Main Safety Contactor Peak Current Rating:
  • 500A BMS: 600A for 5 minutes
  • 1000A BMS: 1200A for 5 minutes
Power Consumption in ON Mode:
• 500A BMS: Approx. 2.6W (217 mA at 12V) depending on the state of the relays
• 1000A BMS: Approx. 4.2W (350 mA at 12V) depending on the state of the relays
• Power Consumption OFF Mode: 0.3 mA for all system voltages
• Power Consumption in Standby Mode: Approximately 0.6W (50 mA at 12V)
• Minimum Load Resistance for Pre-Charging: 10 Ohm and above for 12V systems 20 Ohm and above for 24V and 48V systems
• AUX Output Maximum Current Rating: 1.1A continuous, protected by resettable fuse
• Allow-to-Charge Port Maximum Current Rating: 0.5A at 60V DC, protected by resettable fuse
• Allow-to-Discharge Port Maximum Current Rating: 0.5A at 60V DC, protected by resettable fuse
• Alarm Relay (SPDT) Maximum Current Rating: 2A at 60V DC

Connections:

• Busbar: M10 (Torque: 33 Nm) - can be combined with all M10 Lynx products
• VE.Can: RJ45
• I/O: Removable multi-connector with screw terminals
• Battery BTV Cables: Male and female circular 3-pole connector with M8 screw ring
• Up to 50 batteries can be connected in one system
• Lynx Distributor Fuse Monitoring (up to 4 modules): RJ10 (cable ships with each Lynx Distributor)

Physical:

• Enclosure Material: ABS
• Busbar Material: Tinned copper
• Busbar Dimensions (H x W): 0.31" x 1.18" (8 x 30 mm)
• Enclosure Dimensions (H x W x D):
  • 500A BMS: 7.48" x 7.09" x 3.15" (190 x 180 x 80 mm)
  • 1000A BMS: 9.06" x 7.09" x 3.94" (230 x 180 x 100 mm)
• Unit Weight:
  • 500A BMS: 4.19 lbs (1.9 kg)
  • 1000A BMS: 5.95 lbs (2.7 kg)

Environmental:

• Operating Temperature Range: -40 °C to +60 °C (-40 °F to +140 °F)
• Storage Temperature Range: -40 °C to +60 °C (-40 °F to +140 °F)
• Humidity: Max. 95 % (non-condensing)
• Protection Class: IP22

Standards:

• Safety: EN-IEC 63000:2018
• EMC: EN-IEC 61000-6-3:2007/A1:2011/AC:2012
• QMS: NEN-EN-ISO 9001:2015

Data Sheet

User Manual