Victron Energy MultiPlus Inverter/Charger 12/1200/50-16 - 120V - PMP122120100

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

Features:

• Unique PowerAssist: The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery
• Uninterrupted AC power (UPS function): In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption
• Virtually Unlimited Power: Up to 6 multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible
• Remote Monitoring and Control: When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more

Specifications:

• PowerControl: Yes
• PowerAssist: Yes
• Transfer Switch (A): 16
• Inverter Specifications:
• Input Voltage Range (V DC): 9.5 - 17V, 19 - 33V, 38 - 66V
• Output Voltage: 230V AC, ± 2% / Frequency 50 Hz ± 0,1%
• Continuous Output Power at 25 °C: 1200VA
• Continuous Output Power at 25 °C: 1000W
• Continuous Output Power at 40 °C: 900W
• Continuous Output Power at 65 °C: 600W
• Peak Power: 2400W
• Maximum Efficiency: 93/94/95%
• Zero Load Power: 10/9/10W
• Zero Load Power in Search Mode: 3/3/3W

Charger Specifications:

• Input Voltage Range: 187-265V AC
• Input Frequency: 45 - 65 Hz
• Charge Voltage Absorption: 14.4/28.8/57.6V DC
• Charge Voltage Float: 13.8/27.6V DC
• Storage Mode: 13.8/27.6/55.2V DC
• Charge Current House Battery: 50/25/13A
• Charge Current Starter Battery: 1A (12V and 24V models only)
• Battery Temperature Sensor: Yes

General Specifications:

• Programmable Relay: Yes (1x)
• Protection: a - g
• VE.Bus Communication Port: For parallel and three-phase operation, remote monitoring and system integration (RJ45-splitter ASS030065510 needed for 500 / 800 / 1200 VA models)
• Remote On-Off: On/off/charger only
• DIP Switches: Yes
• Internal DC Fuse: 200/100/50A
• Operating Temperature Range: -40 to +65 °C / -40 to 150°F (fan-assisted cooling), Humidity (non-condensing) max 95%

Enclosure Specifications:

• Material: Aluminum
• Color: Blue (RAL 5012)
• Protection category: IP 21
• Battery Connection: 35/25/10 mm²
• 230V AC Connection: G-ST18i connector
• Weight: 8.2 kg
• Dimensions (H x W x D): 15.98 x 9.84 x 3.94" (406 x 250 x 100 mm)

Standards:

• Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
• Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
• Automotive Directive: ECE R10-5
• Can be adjusted to 60Hz and 240V
• Protection: Output short circuit, Overload, Battery voltage too high, Battery voltage too low, Temperature too high, 230V AC on inverter output, Input voltage ripple too high
• Non-linear load, crest factor 3:1
• Up to 25°C ambient
• A programmable relay that can be set for General alarm, DC under voltage or generator start/stop signal function, AC rating: 230V/4A, DC rating: 4A up to 35VDC, 1A up to 60VDC
• Remote/battery charge voltage/inverter frequency/search mode
• Battery charge voltage/search mode

Data Sheet

Dimensional Drawing