Water Witch Bilge Pump Cycle Counter - BC100RD

Features:

• Pump cycle counters are used to foresee problems in the bilge
  • By comparing a counter's number against a known baseline, a worsening condition can be detected early
  • However, how do you find, use and store that baseline
  • The solution is the WaterWitch BC100, putting current data and a (2) week cycle history available at the touch of a button
• When pressed, the BC100 displays the pump count total since last reset, followed by the total counts from the past 24 hour, 7 and 14 day periods
  • To keep information current, the unit updates itself and recalculates the totals every 24 hours on asliding scale
  • When the 24 hour, 7 day, or 14 day period cycle counts are flashing, it indicates that the power has been interrupted and the count for the period may be invalid
  • Finally, the count illuminates in the display to let you know when the pump is running
• Microprocessor controlled
• No moving parts means no wear
• Count illuminates in L.E.D. display when pump runs
• Tracks pump cycles for preceding 14 days
• Displays total pump cycles since last reset, followed by pump cycles for the previous 24 hr, 7 & 14 day periods
• Data is always current -updates pump totals every 24hrs
• Flashing count signifies a power loss for that time period, indicating the count could be inaccurate
• Exceeds both the United States Coast Guard and U.L. Standards

Specifications:

• Power Required: 12V DC
• Power used at Rest: .020A
• Power at Display: .150A
• Delay on: 6 - 8 Seconds
• Style: Round
• Dimensions: 2 3/8"Diameter x 2 9/16" Deep