Xantrex Freedom Sine Wave Inverter/Charger - 230V AC

The Freedom SW 230V Inverter/Charger is a true sine wave inverter/charger that can be used for mobile, marine and commercial applications. The Freedom SW 230V Inverter/Chargers are designed to operate with a wide variety of generators and are capable of operating in parallel with a generator for short durations to assist with starting large loads. The Freedom SW 230V is a charger, and transfer switch in one electronic device.

Features:

• As an inverter, the Freedom SW 230V provides true sine wave power for your microwave, entertainment system, computer, and other loads. This power is identical to the AC source provided from the utility grid (power company)
• Some of the benefits of true sine wave power include consistent cooking in your microwave, handling of sensitive loads such as your TV set, dimmer switches, and appliances with speed controls
• Highly versatile platform capable parallel stacking to increase power levels
• High efficiency true sine wave output to power sensitive electrical and electronic equipment
• Surge capacity to start difficult loads like well pumps, refrigerators, or A/C compressors
• Power factor-corrected (PFC) input minimizes AC input current required for charging, increasing AC pass-through capacity
• As a 24V charger, it has high output, multi-stage charging capability minimizing charging time

General Specifications:

• Compatible battery types: LiFePO4 / Flooded / gel / AGM
• Transfer relay rating: 1 leg of 30A (2500W/65A), 2 legs at 30A each (3400W/90A)
• Transfer time (AC to inverter and inverter to AC): < 20 ms
• Optimal operating temperature range: – 20°C to 60°C
• Charge temperature compensation: Remote battery sensor (included)
• Storage ambient temperature range: – 40°C to 85°C
• Dimensions: 197 x 343 x 387 mm
• Net Weight: 21.4 kg

2500W/65A Electrical Specifications – Inverter:

• Output power (continuous at 40°C): 2500W
• Surge rating (5 seconds): 5000W
• Output frequency: 50 Hz +/- 0.2 Hz
• Output voltage: 230V
• Output wave form: True sine wave
• Optimal efficiency: 90%
• No-load power draw (inverting): <1.9A DC
• Input DC voltage range: 20 – 32V DC
• AC connections: Single phase in/out

3400W/90A Electrical Specifications – Inverter:

• Output power (continuous at 40°C): 3400W
• Surge rating (5 seconds): 6800 W
• Output frequency: 50 Hz +/- 0.2 Hz
• Output voltage: 230 V
• Output wave form: True sine wave
• Optimal efficiency: 90%
• No-load power draw (inverting): <2.2A DC
• Input DC voltage range: 20 – 32V DC
• AC connections Single phase in/out

2500W/65A Electrical Specifications – Battery Charger:

• Output current (continuous at 25°C): 65A
• Output voltage: 24V DC
• Output voltage range: 12 – 32V DC
• Charge control: 3 stage with manual equalize
• Charge temperature compensation: Remote battery sensor (included)
• Optmial Efficiency: > 85%
• AC input power factor (maximum charge): 0.98 typical
• Input current (for maximum charging): 10.6A RMS nominal
• Input AC voltage: 230V
• Input AC voltage range: 170 - 270V
• Dead battery charge: > 12V DC

3400W/90A Electrical Specifications – Battery Charger:

• Output current (continuous at 25°C): 90A
• Output voltage: 24V DC
• Output voltage range: 12 – 32V DC
• Charge control: 3 stage with manual equalize
• Charge temperature compensation: Remote battery sensor (included)
• Optmial Efficiency: > 85%
• AC input power factor (maximum charge): 0.98 typical
• Input current (for maximum charging): 14A RMS nominal
• Input AC voltage: 230V
• Input AC voltage range: 170 - 270V
• Dead battery charge: > 12V DC

Owner's Manual (6.15 MB)

Brochure

Installation Instructions (7.03 MB)