Xantrex Freedom X Power Inverter

The Xantrex Freedom X Inverter is a true sine wave 120 VAC inverter with a built-in 30 amp transfer switch that senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). It also has an extended surge rating of the Freedom X makes it ideal to start difficult loads including refrigeration units and microwaves.

Features:

• Applications: Recreational and commercial
• True sine wave AC power for operation of sensitive and motor loads
• Built-in 30 amp AC transfer relay senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator)
• Extended surge rating surges to 2X continuous power for 2 seconds for motor loads
• Lightweight and compact package
• Full output from -4° F - 104° F for operation in all climate temperatures
• Ignition control feature turns inverter on/off via a 12V DC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
• Wide 10-18V DC input range ensures inverter operation on high voltage alternators found on many new vehicle chassis
• Quick installation with a huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring

1000W Specifications:

• Electrical
  • Operating Voltage Options: 120, 110, 108V AC
  • Continuous Power Continuous Power: 1000W @ 40° C true sine wave
  • Continuous Current: 8.4 Amps
  • Surge Power: 2000W
  • Frequency: 60 (or 50) Hz
  • Peak Efficiency: 91%
  • Full Load Efficiency: > 87%
  • Operating Voltage Range: 85-140V AC
  • Safe Non-Operating Voltage Range: Up to 240V AC
• Operating Temperature Range:
  • -4 to 140° F (-20 to 60° C), with output derated
  • -4 to 140° F (-20 to 60° C), with output derated above 104° F (40 ° C)
• Storage Temperature Range: -40 to 158° F (-40 to 70° C)
• Humidity: 5 to 95% RH, non-condensing
• Transfer Relay Rating: 30A
• Operating voltage range LBCO voltage: 10 - 18.0V DC
• Maximum Non-Operating Voltage: 24.0V DC
• Nominal Voltage: 12.0V DC
• Nominal Current at Full Load: 100 Amps DC
• Dimensions (L x W x H): 14.2" (360 mm) x 10.6" (270 mm) x 3.7" (95 mm)
• EMC and Safety:
  • ETL listed to CSA 107.1 UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required) ABYC E11, A20, A25, A31

2000W Specifications:

• Electrical
  • Operating Voltage Options: 120, 110, 108V AC
  • Continuous Power Continuous Power: 2000W @ 40° C true sine wave
  • Continuous Current: 16.7 Amps
  • Surge Power: 4000W
  • Frequency: 60 (or 50) Hz
  • Peak Efficiency: 91%
  • Full Load Efficiency: > 87%
  • Operating Voltage Range: 85-140V AC
  • Safe Non-Operating Voltage Range: Up to 240V AC
• Operating Temperature Range:
  • -4 to 140° F (-20 to 60° C), with output derated
  • -4 to 140° F (-20 to 60° C), with output derated above 104° F (40 ° C)
• Storage Temperature Range: -40 to 158° F (-40 to 70° C)
• Humidity: 5 to 95% RH, non-condensing
• Transfer Relay Rating: 30A
• Operating voltage range LBCO voltage: 10 - 18.0V DC
• Maximum Non-Operating Voltage: 24.0V DC
• Nominal Voltage: 12.0V DC
• Nominal Current at Full Load: 192 Amps DC
• Dimensions (L x W x H): 15.4" (390 mm) x 10.8" (275 mm) x 4.0" (102 mm)
• EMC and Safety:
  • ETL listed to CSA 107.1 UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required) ABYC E11, A20, A25, A31

3000W Specifications:

• Electrical
  • Operating voltage options: 120, 110, 108V AC
  • Continuous power: 3000W @ 40° C true sine wave
  • Continuous current: 25 Amps
  • Surge power: 6000W
  • Frequency: 60 (or 50) Hz
  • Peak efficiency: 91%
  • Full load efficiency: > 87%
  • Operating voltage range: 85-140V AC
  • Safe non-operating voltage range: Up to 240V AC
• Operating temperature range:
  • -4 to 140° F (-20 to 60° C), with output derated
  • -4 to 140° F (-20 to 60° C), with output derated above 104° F (40 ° C)
• Storage temperature range: -40 to 158° F (-40 to 70° C)
• Humidity: 5 to 95% RH, non-condensing
• Transfer relay rating: 30A
• Operating voltage range LBCO voltage: 10 - 18.0V DC
• Maximum non-operating voltage: 24.0V DC
• Nominal voltage: 12.0V DC
• Nominal current at full load: 192 Amps DC
• Dimensions (L x W x H): 15.4" (390 mm) x 10.8" (275 mm) x 4.0" (102 mm)
• EMC and safety:
  • ETL listed to CSA 107.1 UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required) ABYC E11, A20, A25, A31

Freedom X-Series Inverter Owner's Guide (4.53 MB)