Xantrex Freedom XC Power Inverter/Charger

The 1000W, 50A Xantrex Freedom XC Inverter/Charger offers premium performance in a lightweight compact package. It provides full output in invert or charge mode from -4° F - 104° F for operation in all climate temperatures. The extended surge rating of the Freedom XC makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze.

Features:

• Inverter Features:
  • Extended surge rating surges to 2X continuous power for 2 seconds for motor loads
  • True sine wave AC power for operation of sensitive and motor loads
  • Ignition Control Feature to turn inverter on/off via a 12V DC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
  • Wide 10-18V DC input range ensures inverter operation on high voltage alternators found on many new vehicle chassis
  • Programmable AC under-voltage (85-110V AC) shutdown feature ideal to operate under weak shore power or generator input
  • Built-in 30A AC transfer relay senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power
• Built-in Charger Features:
  • Power factor corrected multi-stage charging utilizes less shorepower when charging batteries
  • This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers
  • Programmable configurable 3-stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V
  • Battery equalization maximizes flooded battery life
  • Dead battery charging down to 0V DC
  • Power share prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting
  • This inverter / charger is Not ignition protected

1000W Inverter/50A Charger Specifications:

• Electrical Inverter
  • Operating Voltage Options: 120, 110, 108V AC
  • Continuous Power: 1000W @ 40° C true sine wave
  • Continuous Current: 8.4A
  • Surge Power: 2000W
  • Frequency: 60 (or 50) Hz
  • Peak Efficiency: 91%
  • Full load Efficiency: > 87.5%
  • Full Load Maximum Current: 7A
  • Operating Voltage Range: 85-140V AC
  • Safe Non-Operating Voltage Range: Up to 240V AC
  • Power Factor at Full Charge: > 98%
• Electrical Specifications - Battery Charger
  • Min Battery Voltage for Charging: 0.0V DC
  • Max Output Voltage: 18.0V DC (custom battery type)
  • Nominal Output Current: User selectable 5 - 50A
• Operating Temperature Range:
  • 4 to 140° F (-20 to 60° C), with output derated
  • 4 to 140° F (-20 to 60° C) with output derated above 104° F (40 °C)
  • Storage Temperature Range: -40 to 158° F (-40 to 70° C)
  • Humidity: 5 to 95% RH, non-condensing
  • Transfer Relay Rating: 30A
  • Operating voltage range LBCO voltage: 18.0V DC
  • Maximum Non-Operating Voltage: 24.0V DC
  • Nominal Voltage (Inverting and Charging): 12.0V DC
  • Nominal Current at Full Load: 100 ADC
  • Dimensions (L x W x H): 14.2" (360 mm) x 10.6" (270 mm) x 3.7" (95 mm)
• EMC and Safety
  • ETL listed to CSA 107.1 UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required) ABYC E11, A20, A25, A31
  • This inverter/charger is Not ignition protected

2000W Inverter/80A Charger Specifications:

• Electrical Inverter
  • Operating Voltage Options: 120, 110, 108V AC
  • Continuous Power: 2000W @ 40° C true sine wave
  • Continuous Current: 16.7A
  • Surge Power: 2000W
  • Frequency: 60 (or 50) Hz
  • Peak Efficiency: 91%
  • Full load Efficiency: > 87.5%
  • Full Load Maximum Current: 11A
  • Operating Voltage Range: 85-140V AC
  • Safe Non-Operating Voltage Range: Up to 240V AC
  • Power Factor at Full Charge: > 98%
• Electrical Specifications - Battery Charger
  • Min Battery Voltage for Charging: 0.0V DC
  • Max Output Voltage: 18.0V DC (custom battery type)
  • Nominal Output Current: User selectable 5 - 80A
• Operating Temperature Range:
  • 4 to 140° F (-20 to 60° C), with output derated
  • 4 to 140° F (-20 to 60° C) with output derated above 104° F (40 °C)
  • Storage Temperature Range: -40 to 158° F (-40 to 70° C)
  • Humidity: 5 to 95% RH, non-condensing
  • Transfer Relay Rating: 30A
  • Operating voltage range LBCO voltage: 18.0V DC
  • Maximum Non-Operating Voltage: 24.0V DC
  • Nominal Voltage (Inverting and Charging): 12.0V DC
  • Nominal Current at Full Load: 198 ADC
  • Dimensions (L x W x H): 14.2" (360 mm) x 10.6" (270 mm) x 3.7" (95 mm)
• EMC and Safety
  • ETL listed to CSA 107.1 UL458 and UL458 Marine Supplement (drip shield with product number 808-1050 required) ABYC E11, A20, A25, A31
  • This inverter/charger is Not ignition protected

Owner's Manual (4.65 MB)