Zipwake Series E Replacement Interceptor Front Plate

Replacement plate components for Zipwake Series E Interceptors. A front assembly comprises the interceptor's front housing, blade and assisting roller blade, the small parts that deal with blade linear motion and the set of screws required to mount the front to the back plate. The front assemblies of the Series E interceptors have been designed to mitigate further damage to the interceptor in the rare event of contact with floating debris. Each interceptor model's front assembly is therefore available as a spare part.

Series E is a family of large, fast-acting interceptors. Their blade rate and stroke are 40 mm/s and 60 mm respectively. The large, modular design made for mass production means the interceptors are durable, affordable and particularly well adapted to any planing or semi-planing boat up to 100' (30 m).

For best effect, different size interceptors can be combined to span as much of the transom edge as possible. A full beam is always the optimal arrangement from a lift-to-drag ratio point of view.

Straight interceptors come in a wide range of sizes including the following models IT400-E, IT600-E, IT800-E and IT1000-E for modular use.

Tunnel-shaped interceptors provide the perfect lift-force solution for hulls with propeller tunnels. In contrast to straight interceptors, the tunnel interceptor's constant radius curvature allows mounting above the propeller tunnel to fully or partially use the otherwise unutilized part of the beam for lift generation. The three tunnel models with different radii, R500, R600 and R800, make sure that most large boat propeller tunnels can be covered with negligible deviation between hull and interceptor curvature. Tunnel interceptors can be included in new installations, or retro-fitted to systems already installed.

Chine interceptors provide a unique means of maximizing pitch and roll motion control by utilizing the furthest outboard surfaces of the hull bottom for lift generation. As a rule, the lift effect of a chine interceptor matches the lift of a straight interceptor one size larger mounted inboard of the chine, making them the go-to choice when selecting interceptors. Chine interceptors are particularly useful when transom space is limited abeam of swim platform lifts, waterjets, surface drives, or outboards.

Features:

• True outboard mount
• Modular design
• Fast actuation
• Straight, tunnel and chine models
• Integrated mounting plate
• Thru hull fitting options - Above waterline - Concealed behind interceptor
• Submersible servo units
• Brushless 12 - 24V DC servo motor
• Durable and accessible
• Calibration free
• Auto Cleaning - Selectable periodic cleaning cycle - Prevents fouling inside the interceptor
• No corrosive materials

Complete Interceptor Specifications:

• Length:
  • 400: 15.7"
  • 600: 23.6"
  • 800: 31.5"
  • 1000: 39.4"
• Weight:
  • Straight:
    • 600: 16.1 lbs
    • 800: 31.5 lbs
    • 1000: 25.4 lbs
  • Tunnel:
    • R500: 18.5 lbs
    • R600: 18.1 lbs
    • R800: 17.4 lbs
  • Chine:
    • 400: 11.2 lbs
    • 600: 16.3 lbs
• Servo actuator: SU-400E for size 400/R500, SU-E for others
• Max. Boat Speed: 50 knots
• Blade Stroke: 2.4" (60 mm)
• Blade Rate: 1.6"/s (40 mm/s)
• Thru-Hull Cable Fitting: Concealed or above waterline
• Cable Length: 10' (3 m), extendable up to 20' (6 m)
• Cable Material: PUR
• Connector: M12 5-pin circular
• Connector Diameter: 0.57" (14.5 mm)
• Supply Voltage: 12 - 32V DC
• Power Consumption: 25W max/servo unit
• Operating Temperature: 0° to +40°C (+32° to +104°F)
• Storage Temperature: -40° to +90°C (-40° to +194°F)
• Waterproof Rating: IP68 16' (5 m)
• Compliance: CE, FCC