Adler Barbour Dometic Replacement Thermostat - 290000280

The Adler Barbour/Dometic Replacement Thermostat is designed for use with the 80 and 100 Series Dometic/Adler Barbour Evaporator Units.

Features:

• Adler Barbour Replacement Thermostat
• Applications: 80 and 100 Series Dometic/Adler Barbour Evaporator Units

Installation :

• Mount the thermostatic control unit high in the icebox, away from moisture and spillage
  • It should also be visible and accessible
  • It is acceptable to mount the thermostatic control unit outside of the icebox space if you prefer
  • At least 12 inches/30.5 cm of capillary sensing tube must be inside the box
• The capillary sensing tube is 36 inches/91.4 cm long and must reach from the thermostatic control unit to the clamping plate on the side of the freezer unit
  • It must be routed along the icebox wall, clear of food, shelving, etc
• The thermostat can be mounted by using either the adhesive backing on the thermostat mounting flanges or the stainless steel mounting screws (supplied)
  • If using the adhesive backing, the mounting area must be clean and dry
  • Peel off the protective backing from the adhesive foam on both mounting flanges of the thermostatic control unit, position carefully and press firmly to adhere
• Adler Barbour recommends that you also use the mounting screws by drilling two 9/64 inch /0.36 cm holes through the thermostat flange holes