Airmar B150 Chirp-Ready Titled Element Transducer - 7-Pin Navico

Unlock the true potential of your fishfinder with the superior quality and performance of an AIRMAR Chirp-ready transducer.

Features:

• Depth and fast-response water-temperature sensor
• 300of power for more detail at greater depths
• Low-profile, thru hull housing provides good resolution at speed when properly installed flush to the hull
• Bronze housing for use on stepped, planing or displacement hull
• Fixed 0° tilt angle that compensates for 0° to 7° hull deadrise
• Corrects for the hull deadrise by orientating the beam directly down
• Medium frequency: 95 to 155 kHz
• Ideal for freshwater, inshore or coastal fishing in shallow to medium depths
• 26° to 17° beamwidth
• Maximum depth performance to 183 m (600')
• Narrow beam angle is perfect for detecting fish holding close to structures and suspended fish
• 60 kHz of total bandwidth from one transducer
• Exclusive Xducer ID® technology
• Automatic configuration of echosounder to transducer - enables the echosounder to adapt to the transducer connected, providing an optimized system
• Continuous monitoring of ceramic operating temperatures
• Transducer profile information can be presented on the OEM echosounder display
• 7-Pin cable end for use with compatible Simrad / Lowrance sounders

Specifications:

• Fixed tilt angle: 0,12, or 20 degrees
• Chirp band: Medium
• Frequency: 95 to 155 kHz
• Beam width: 26°-17°
• Recommended boat length: Up to 8 m (25')
• Hull material: Fiberglass or wood
• Acoustic window: Urethane
• Transducer element: One internal broadband ceramic assembly
• Hole diameter: 51 mm or 2"
• Weight: 1.4 kg (3 lbs.)

Installation Instructions

Data Sheet (2.58 MB)