Anchoring & Docking

About Anchoring & Docking

A good boat anchor and the proper anchoring accessories to set and retrieve it can make the difference between a great time on the water and a very frustrating exercise in futility. Nothing is more irritating than having to cut the line on a perfectly good anchor rode because you are unable to hoist it aweigh and haul it on board your boat.

First, you need to know what type of sea bottom that you will normally be dropping your anchor into so you can decide which anchor will work best for your needs. Then, you need to decide upon the length of anchor rode that you will need to buy, again, based upon the majority of places that you plan to drop anchor. If you are planning on spending a lot of time deep sea fishing, you will need to buy a longer anchor rode than if you just plan to anchor near shore all the time. The choice is entirely up to you, which is the reason why we are generally reluctant to advise you and never pressure you into making a purchase decision.

However, you should always buy the best anchoring gear that you can afford because you can never predict when you will need to rely on it in an emergency, so make sure that your cleats, chocks, bow roller, and windlass are strong enough to carry the load of your boat in any sea conditions. Also, having the proper chafing gear and shock absorbers will protect the investment in your favorite boat, so you can enjoy being out on the water.

Anchoring & Docking

Polyform G-4 Ribbed Twin-Eye Fender

Polyform HTM-3 FenderFits Fender Cover

Maxwell Replacement Emergency Windlass Crank Handle/Crank Lever - P20044

Polyform EFC-2 Elite Fender Cover

Polyform A-6 Commercial Grade Buoy

Polyform HTM-2 FenderFits Fender Cover

Maxwell Freedom Windlass Shaft Service Kit - P100087

Maxwell Windlass Stripper Arm Assembly Kit - P100085

Maxwell Replacement Windlass Seal Kit - P90003

Polyform EFC-A2 Elite Fender Cover

Maxwell Up/Down Windlass Control Panel - P102938

Maxwell Windlass Gearbox Seal Kit - P90005

Maxwell Windlass Replacement Pressure Arm - P104711

Polyform F-3 Commercial Grade Classic European Twin-Eye Fender

Polyform G-3 Ribbed Twin-Eye Fender

Polyform G-6 Ribbed Twin-Eye Fender

Polyform Swivel Connector

Polyform EFC-3 Elite Fender Cover

Polyform EFC-A3 Elite Fender Cover

Maxwell Windlass Replacement Motor

Maxwell AA Rope/Chain Counting Sensor - SP4120

Maxwell Height Matched Chain Stopper

Polyform HTM-4 FenderFits Fender Cover

Polyform F-6 Commercial Grade Classic European Twin-Eye Fender

Polyform EFC-4 Elite Fender Cover

Polyform Elite Fender Cover EFC-A1

Maxwell Lever Assembly

Polyform F-2 Commercial Grade Classic European Twin-Eye Fender

Maxwell Single Direction Solenoid

Maxwell HRC10-10 Horizontal Windlass - HRC101012VLP

Maxwell Replacement Freedom Windlass Clutch Nut - 4376

Maxwell Replacement Windlass Stripper Arm Assembly Kit

Polyform A-4 FenderFits Fender Cover

Polyform F-7 Commercial Grade Classic European Twin-Eye Fender

Maxwell HRC-FF Series Windlass Chainwheel Assembly

Maxwell Windlass Chainwheel Assembly

Maxwell Windlass Replacement Cap and O-Ring Kit - P104750

Polyform F-3 FenderFits Fender Cover

Polyform HTM-1 Line-Through Fender

Maxwell AA150 Rode/Chain Counter - P102939

Maxwell Gear Box - P12427

Maxwell HRC Series Horizontal Windlass with Capstan - HRC10812V

Maxwell Windlass Replacement Plunger/Spring Kit - P101550

Maxwell Windlass Replacement Pressure Arm - P104704

Maxwell Windlass Spare Seal Kit - P90006

Polyform A-0 Commercial Grade Buoy

Polyform CC-4 Center Tube Buoy

Maxwell Bi-Square Handle

About Anchoring & Docking

2Filters

Change Locale

Helpful Information

Get In Touch

Resources

Stay Connected