Anchoring & Docking

About Anchoring & Docking

A good boat anchor and the proper anchoring accessories to set and retrieve it can make the difference between a great time on the water and a very frustrating exercise in futility. Nothing is more irritating than having to cut the line on a perfectly good anchor rode because you are unable to hoist it aweigh and haul it on board your boat.

First, you need to know what type of sea bottom that you will normally be dropping your anchor into so you can decide which anchor will work best for your needs. Then, you need to decide upon the length of anchor rode that you will need to buy, again, based upon the majority of places that you plan to drop anchor. If you are planning on spending a lot of time deep sea fishing, you will need to buy a longer anchor rode than if you just plan to anchor near shore all the time. The choice is entirely up to you, which is the reason why we are generally reluctant to advise you and never pressure you into making a purchase decision.

However, you should always buy the best anchoring gear that you can afford because you can never predict when you will need to rely on it in an emergency, so make sure that your cleats, chocks, bow roller, and windlass are strong enough to carry the load of your boat in any sea conditions. Also, having the proper chafing gear and shock absorbers will protect the investment in your favorite boat, so you can enjoy being out on the water.

Anchoring & Docking

Peerless ACCO Grade 43 Domestic High Test ISO Chain - 3/8"

Peerless ACCO Grade 43 Domestic High Test ISO Chain - 5/16"

Vetus Bow 75 Thruster

Peerless ACCO BBB Chain - 3/8"

Vetus Thruster Propeller

Vetus Bow 60 Thruster

Vetus Thruster Control Panel - BPJE2

Vetus Bow 45 Thruster - BOW4512D

Vetus Thruster Solenoid Pack - 12V - SET0015

Polyform HTM-3 Line-Through Fender

Peerless ACCO Grade 43 Domestic High Test ISO Chain - 1/2"

Vetus Tailpiece for BOW220/230/285/310 - SET0165

Vetus Round Thruster Control with Joystick - BPJR

Vetus Tailpiece for BOW160 A/B - SET0080

Vetus BowithStern Thruster Control Panel - BPJDE2

Polyform HTM-2 Line-Through Fender

Polyform A-2 Commercial Grade Buoy

Vetus Double CAN Proportional Thruster Joystick - DBPPJA

Vetus Easy Docking System for Bow/Stern Thruster - EZDOCK2

Polyform A-4 Commercial Grade Buoy

Polyform A-3 Commercial Grade Buoy

Vetus Bow 55 Thruster

Vetus Bow Thruster Control Cable

Vetus Solenoid Switch

Polyform True-Fit Fender Holder

Polyform EFC-A4 Elite Fender Cover

Vetus Thruster Control Panel - BPSR

Vetus Bow 160 Thruster - BOW16024D

Polyform A-5 Commercial Grade Buoy

Polyform EFC-A3 Elite Fender Cover

Polyform G-5 Ribbed Twin-Eye Fender

Vetus GRP Stern Thruster Tunnel

Polyform HTM-4 Line-Through Fender

Vetus 12V Motor and Relay Set for BOW25/35/40 - SET0228

Vetus Bow 55 Thruster - Ignition Protected

Polyform F-10 Commercial Grade Classic European Twin-Eye Fender

Polyform EFC-2 Elite Fender Cover

Polyform A-6 Commercial Grade Buoy

Vetus Proportional Control Thruster Joystick Panel with Hold and Lock - BPPJA

Polyform G-6 Ribbed Twin-Eye Fender

Polyform F-8 Commercial Grade Classic European Twin-Eye Fender

Vetus Bow Thruster - BOW2512E

Peerless ACCO Mooring Chain - 1/2"

Peerless ACCO Mooring Chain - 5/8"

Polyform A-1 Commercial Grade Buoy

Polyform G-4 Ribbed Twin-Eye Fender

Vetus Thruster Control Panel - BPSE2

Polyform EFC-A5 Elite Fender Cover

About Anchoring & Docking

3Filters

Change Locale

Helpful Information

Get In Touch

Resources

Stay Connected