Awlgrip Awlwood Brush Cleaner - T0200/1QTUS

Awlwood T0200 Brush Cleaner - quart is formulated to preserve and clean brushes used during application of Awlwood products. It must never be used as a thinner for any Awlwood product and should not be used with, or added into, any other Awlgrip branded products.

Features:

• Formulated to preserve and clean brushes during application of Awlwood products
• Must not be used as a thinner for Awlwood products
• Should not be used with or added into any other Awlgrip branded products
• Brush Cleaning:
  • Ensure all traces are removed from brushes and equipment by drying VERY thoroughly and/or rinsing with the Awlwood Brush or Spray reducers
  • After removing all traces of Awlwood from the brush, place brush in a container with OT0200 Brush Cleaner covering the bristles
  • Push the brush against the bottom of the container to flex the bristles open working the cleaner right into the core of the brush
  • For wet storage leave brush soaking overnight
  • Prior to reuse work out excess cleaner and spin or shake dry
  • Then rinse the brush in either the Awlwood Brushing or Spray reducer to remove any traces of the Brush Cleaner and to help prevent the brushes from feeling gummy
• Dry Brush Storage:
  • Leave soaking overnight then remove excess product
  • Rinse again in clean OT0200 Brush Cleaner
  • Shake out and dry

Note: This multi-component system is intended for experienced painters. Please read mixing and application instructions thoroughly prior to starting project to ensure best results.

Product Data Sheet

Safety Data Sheet