Awlgrip Fast Evaporating Topcoat Spray Reducer

Awlgrip Fast Evaporating Topcoat Spray Reducer (T0001) is usually used in Awlgrip and Awlcraft 2000 Topcoats. T0001 is also recommended for use in Quik-Grip Primer. This reducer will keep the paint film open for good flow but evaporate fast enough to provide adequate dry and dust-free times.

Features:

• Use T0001 in AWLGRIP® / AWLCRAFT® 2000 Top coats when application and cure temperatures are between 60°F to 70°F (16°C to 21°C) and 80°F
• Keeps the paint film open for good flow but evaporate fast enough to provide adequate dry and dust-free times.
• At higher temperatures, the solvency of T0001 helps maximize atomization.
• Its fast evaporation rate allows the solvent to exit the film before skinning occurs, avoiding solvent entrapment or solvent "pop"
• Suitable for above and below the waterline
• Components: 1

NOTE: At higher temperatures, reducers evaporate faster. When painting in hot conditions increasing the amount of reducer in the mix by 5-10% will help compensate for this factor.

Data Sheet

Safety Data Sheet