Barton Beam Track Section

Use beam track when spanning cockpits or companionway hatches, where unsupported length is required. A minimum of three fastenings should be used on either side of the unsupported length - place fastenings at 100 mm centres in supported sections.

Specifications:

• Size 1:
  • Max Unsupported Length: 15.75" (400 mm)
  • Width 1: 25/32" (20 mm)
  • Width 2: 1 1/32" (26 mm)
  • Height: 1 1/32" (27 mm)
  • Fastenings: 1/4" (6 mm)
• Size 2:
  • Max Unsupported Length: 27.5" (700 mm)
  • Width 1: 1 1/32" (26 mm)
  • Width 2: 1 11/32" (34 mm)
  • Height: 1 11/32" (34.5 mm)
  • Fastenings: 5/16" (8 mm)
• Size 3:
  • Max Unsupported Length: 31.5" (800 mm)
  • Width 1: 1 3/16" (30 mm)
  • Width 2: 1 9/16" (40 mm)
  • Height: 1 9/16" (40.5 mm)
  • Fastenings: 13/32" (10 mm)