EchoMax Active X Band Radar Reflector Kit - EMACTIVEXM

EchoMax Active-X (Model EMACTIVE-XM) is typically used for coastal waters where ships run their X band radar only. This active X Band radar reflector kit amplifies and returns an amplified response when excited by incoming radar signals making vessels more visible to you and you more visible to them.

Features:

• Typically used for coastal waters where ships run their X band radar only
• Active-X and XS radar target enhancer amplifies and returns an amplified response when excited by incoming radar signals
• Greatly increases your vessel's RCS, radar cross section, and the likelihood of alerting oncoming vessels of your position, especially in poor conditions
• Active-X reduces the risk of surprise or collision
• The RTE is primarily intended for small vessels with no radar fitted and typically should enhance the RCS (radar cross section) of vessels up to 25M in length
• For Small craft and rigid inflatables, improvements will start to be seen at around 1-2 miles extending to 8-10 miles or more depending on prevailing conditions
• The response of the RTE will vary according to range, RTE and radar height above sea level, radar power and condition
• Poor weather, sea state and precipitation will greatly reduce the response
• The streamlined reflector is only 27 inches high and 1.6 inches in diameter allowing for flexible installation on all sorts and sizes of vessels
• Control Box:
  • Surface mount for interior installation
  • Optional flush mount, or waterproof version for exterior fitting (Sold Separately)
• Wire exit from bottom or rear
• Active Antenna can be special ordered without the control box for autonomous vehicles requiring just radar transponder operation
• Operation:
  • Green Switch activates internal buzzer when painted by X Band Radar
  • Green LED illuminates when being painted by X Band Radar
  • 8A Extension alarm facility when painted by either X Band Radar
  • Externally accessible fuse

Specifications:

• Operation:
  • Reception frequency: X Band radar 9.3 - 9.5 GHz
  • Operating temperature: - 20 to + 60 degrees C
  • Voltage: 12V DC - + 30% -10% (voltage surge and cross polarity protected)
  • Current consumption in standby state: <23 mA
  • Current consumption when transmitting: X Band radar 190 mA, S Band radar 155 mA
  • Position accuracy: Within 3 feet
• EIRP: 1W (typically)
• Dimensions:
  • Antenna length: 18.76"
  • Antenna width: 1.6"
  • Mounts to standard 1 x 14 antenna mount
  • Antenna weight without cable: 1.25 lb
  • Control box width: 3.6"
  • Control box height: 2"
  • Control box depth: 1.5"
  • Cable length: 80 feet
  • Cable weight: 2 lb
• Control Box:
  • Surface mount for interior installation
  • 8A extension alarm
  • Externally accessible fuse
• Antenna mounting bracket:
  • ACTIVE-X Stainless vertical surface bracket
  • Base fitting for cabin roofs and A-frames
• Mounting options (sold separately):
  • Offset Mast head bracket with 10.2 in. reach and 1 inch -14NF thread
  • 26" Extension pole
• Complies with:
  • EN 302 752 V1.1.1. (2009-02)
  • EN 60945: 2002 (Clauses 9,10 & 12)
  • Essential requirements of R & TTE Directive 1999/5/EC. CE 0191:
  • Performance requirements of ISO 8729-2
  • X Band Radar
• X Band Radar SPL
  • (ISO Standard 7.5 m2)
  • Zero degrees: 118.33 m2
  • +/-10 degrees: 65.07 m2
  • +/- 20 degrees: 19.49 m2

Package Includes:

• Onboard alarm / control box that indicates to the operator their vessel is a radar target
• An alarm condition triggers both internal and external visual and audible alarms
• Includes a standard surface mounted control box (flush mount kit EMFMKM is sold separately)
• Active-X antenna with base mount
• 80 Feet of cable