Pettit Tuff Coat 2-Component Water-Based Epoxy Primer

Pettit's Tuff Coat Primer is a two component water-based epoxy primer/sealer that promotes adhesion between Tuff Coat™ and fiberglass, gelcoat, concrete, wood or painted surfaces.

Features:

• 2-Component water based epoxy primer
• Marine grade formula with an exceptionally easy 1:1 mix ratio
• Preps surfaces for Tuff Coat rubberized non-skid coatings
• Soap and water clean-up
• Chemical and UV resistant
• Excellent for fiberglass, gelcoat, wood, concrete and painted surfaces
  • May be used for full submersion applications

Specifications:

• Vehicle type: Epoxy
• Finish: Matte
• Solids by weight: 58%
• VOC: 120 grams/liter
• Flash point: 0° F
• Application method: Roller or spray
• Maximum roller thickness: 3/8"
• Number of coats: 1
• Wet film thickness: 5-7 mils
• Dry film thickness: 2-3 mils
• Application temperature: 45° F min/95° F max
• Thinner/cleaner: Water
• Dry time: Minimum time in hours
  • 90° F: 1/2 to touch, 3 to topcoat
  • 70° F: 1 to touch, 6 to topcoat
  • 50° F: 2 to touch, 12 to topcoat

Note: This primer may take longer to cure when used in moist areas

Product Data Sheet

SDS A

SDS B