Raritan SeaEra Integral Intake Conversion Kit

The SeaEra Conversion Kit is an economical way to upgrade your existing toilet by utilizing your existing bowl and seat. This conversion kit will fit the toilet bowls from Rartitan's crown head, crown head II, PHII, PHEII, Cricket, Compact II or any bowl which has a four hole bolt pattern 3 11/16" (9.4 cm) in diameter. The built-in discharge fitting can accept either 1 1/2" (38 mm) or 1" (25 mm) discharge lines without the need for an adapter. The SeaEra's discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a fullsized joker valve to help avoid clogging. The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a retrofit, water can be routed from either side of the inlet pump using interchangeable 3/4" (19 mm) hose barb fittings (two straight and one 90 deg.), which are included.

Notes:

• Additional Part Required: 4 stainless steel mounting bolts or lag screws (minimum 1/4" [6 mm]) and washers, 1" (25 mm) or 1 1/2" (38 mm) I.D. discharge hose, 3/4" (19 mm) I.D. intake hose, hose clamps, wire, fuses or circuit breakers
• Bowl and seat are not included with conversion kits

Product Brochure