A complete autopilot solution for smaller powerboats with hydraulic steering. Ideal for single-engine outboards, the EV-100 delivers precision control using the intelligent EV-1 sensor core and the ACU-100 actuator control unit. The system includes a 0.5 L hydraulic autopilot pump, compatible with outboard hydraulic steering cylinder capacities between 50 cc - 110 cc (3.1 cu in - 6.7 cu in)

In the Box (Complete Pack):

• EV-1 Sensor Core (E70096)
• ACU-100 Actuator Control Unit (E70098)
• P70RS Control Head (E70329)
• Type 0.5 Hydraulic Pump (E12139)
• Evolution SeaTalkNG Cable Kit (R70160)
• Documentiation

Available Configurations:

• Complete Pack
• Pack without a P70RS Control Head for use with a Raymarine Axiom Chartplotter's built-in pilot controls

Features:

• Requires no complicated setup or autopilot calibration.
• Exclusive Raymarine Hydro-Balance™ technology adjusts for elasticity in the hydraulic steering systems and compensates automatically to prevent steering oscillation. The result is precise course-keeping and no drive-unit hunting.
• The EV-100 autopilot steers so accurately you will save fuel and get to your destination faster.

General Specifications:

• Nominal Supply Voltage: 12V DC
• Relative Humidity: Max. 93%
• Storage Temperature Range: -22°F to 158°F (-30°C to 70°C)

EV-1 Sensor Core Specifications:

• Dimensions (Dia. x D): 5.5 x 1.4" with mounting enclosure/3.8" with wall bracket (140 x 35/95 mm)
• Weight: 0.64 lbs (0.29 kg)
• Sensors: 3-axis digital accelerometer, 3-axis digital compass, 3-axis gyro digital angular rate sensor
• Waterproof Rating: IPx6
• Operating Temperature:-13°F to 131°F (-25°C to +55°C)
• Operating Voltage Range: 10.8 to 15.6V DC
• Power Consumption: 30mA
• LEN (NMEA 2000 Load Equivalency Number): 1

ACU-100 Specifications:

• Dimensions (W x H x D): 7.1" x 5.5" x 2.0" (180 x 140 x 52 mm)
• Weight: 1.32 lbs (0.6 kg)
• Waterproof Rating: Connector panel: IPx2, Drive electronics: IPx6
• Operating Temperature: -4°F to 131°F (-20°C to +55°C)
• Operating Voltage Range: 10.8 to 15.6V DC
• Power Consumption (Standby): 300mA
• Drive Current Output: Maximum continuous 7A at supply voltage
• LEN: 1
• Standards: Europe: 2004/108/EC, Australia and New Zealand: C-Tick, Compliance Level 2

P70RS Control Head Features:

• 3.45" super bright TFT LCD
• Optical bonding for brighter colors, sharper contrast, and fog-free operation
• Rotary controller for course changes and power steer mode
• Glass bridge design compliments Axiom-series chartplotters
• SeaTalkng networking for seamless connection to Raymarine and NMEA2000 networks
• Supplied with both black (Axiom style) & gunmetal (Series style) bezels and protective suncover

P70RS Specifications:

• Dimensions (W x H x D): 4.33" x 4.53" x 5.97" (including cable bend radius) (110 x 115 x 151.65 mm)
• Waterproof Rating: IPx6, IPx7
• Operating Temperature Range: -4°F to 131°F (-20°C to 55°C)
• Operating Voltage Range: 9 to 16V DC (protected up to 32V DC)
• Current: 131mA
• Power Consumption: 1.57W
• Resolution: 320 x 240p
• Color: 16-bit
• Brightness: 1,200 cd/m2
• Connections: 1 x SeaTalkNG connector
• LEN: 3
• Standards: Europe: 2004/108/EC, Australia and New Zealand: C-Tick, compliance level 2

Type 0.5 Hydraulic Pump Features:

• For use with traditional hydraulic steering systems
• Connects to hydraulic steering lines, allow the autopilot to steer the boat by controlling the flow of fluid through the system
• The hydraulic pump is controlled by the Evolution autopilot Actuator Control Unit

Note: In some systems with dual steering rams in parallel, cylinder capacity is the total of both rams. Rams in series only require single capacity valve. Systems with rams over 500 cc require a larger constant running pump in conjunction with the relevant ACU

Note: An authorized Raymarine dealer is best suited to installing a hydraulic autopilot system

Note: Suitable for Volvo D4/D6 Sterndrive applications

Brochure (3.63 MB)