Reverso FPM-150 Fuel Polishing Module with Digital Timer

Reverso FPM-150 Fuel Polishing Module

Features:

• The only true Fuel Polishing Module available
• Just add the filter of your choice (Adaptable with any filter)
• Easy to install module, turns any filter into a comprehensive fuel polishing system
• Works with most standard filters
  • Choose the filter that suits your needs. (e.g. Separ Filter, Racor, Fleetguard, Yamaha, Sierra, Baldwin, Cummins, Mallory, Dorman, Fram, etc.)
• Recommended for use with middle-distillate fuels and fuel oils
  • Recommended for use with diesel, biodiesel, and kerosene (Not For Gasoline)
• Reverso recommends you turn the fuel (3) times for an initial cleaning
• Once in maintenance mode, you can perform this cleaning once a week
• Continuous use is not required
• Recommended Run Cycle = Volume of the Tank x 3 Flow Rate
• Water resistant enclosure
• Heavy duty gear pump (150 GPH)
• Digital timer
• Audio and visual alarm
• Automatic shut-off switch
• Water resistant aluminum enclosure
• Filter not included
• Can be installed on the inlet or outlet side of the filter

Specifications:

• Flow Rate: 2.6 GPM (10 LPH)
• Voltage: 12 VDC or 24 VDC
• Inlet Port: 1/2" Hose Barb
• Outlet Port: 1/2" Hose Barb
• Amp. Draw: 20A @ 12 VDC, 11A @ 24 VDC
• Circuit Breaker: 25A @ 12 VDC, 15A @ 24 VDC
• Self Priming: 5 ft (1.5 m) (wet gears)
• Maximim Lift: 10 ft (3 m) with foot valve
• Maximum Work Pressure: 50 psi / 3.5 bar
• Maximum Work Temperature: 140° F / 60° C
• Total discharge head not to exceed 30 ft
• Dimensions:
  • 12" Width
  • 8.7" Height
  • 4.4" Depth

Data Sheet