Star Brite Snappy Step #1 Teak Cleaner and Restorer

Features

• Snappy Teak-Nu #1 is an easy-to-use first part of a two-part teak cleaner and restorer process
  • Please use both steps with Teak-Nu #1and Teak-Nu #2 (Sold Separately) as the chemical reaction between the two products is what leaves teak looking brand new
• Function: Removes gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
• No hard scrubbing or bronze wool required
• Will not soften deck seams
• Avoid contact with painted or varnished surfaces
• Made in the USA

Directions:

Badly soiled, oiled or coated teak :

• Wear protective gloves
• Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck
• Use a bristle brush (Sold Separately) to spread evenly across area to be treated
• When the treated area darkens to a uniform dark brown, use coarse bristle brush (Sold Separately) to scrub wood
• Avoid contact with painted or varnished surfaces
• Rinse brushes after use
• Next, use bristle brush (Sold Separately) to spread Snappy™ Teak-Nu™ Formula No. 2 (Sold Separately) uniformly over the treated area, then use coarse bristle brush (Sold Separately) to loosen and remove dirt
• The treated area will lighten to a golden brown
• Rinse treated area thoroughly with water

Lightly soiled teak:

• Wear protective gloves
• Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 (Sold Separately) to an approximately 50% solution
• Use bristle brush (Sold Separately) to spread evenly over area to be treated
• When the treated area darkens to a uniform dark brown, use medium bristle brush to scrub lightly
• Avoid contact with painted or varnished surfaces
• Rinse brushes thoroughly after use
• Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 (Sold Separately) to an approximately 50% solution, then use bristle brush to spread uniformly over treated area
• Use soft bristle brush (Sold Separately) to scrub lightly to attain a uniform light color
• Rinse treated area thoroughly
• When the treated area is completely dry, the deck will look like it has been freshly sanded

Helpful Suggestions:

• Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use
• To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2
• Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood

Important Note: Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 (Sold Separately) to achieve best results.

Safety Data Sheet