Taylor Made
Taylor Made Stainless Steel Flag Pole
Item: #885623 | Part Number: Not Selected21% off
$123.42 - $224.18
$123.42 - $224.18
Description
Taylor Made's Flag Pole provides a highly polished and durable stainless steel construction, for use in holding a flag taut so it will never tangle. Features: Highly polished stainless steel from top to bottom Finial and base are cast from 1" diameter 304 stainless steel Unique flag clips are cast...
Taylor Made Stainless Steel Flag Pole Item # 885623

Description
Taylor Made's Flag Pole provides a highly polished and durable stainless steel construction, for use in holding a flag taut so it will never tangle.
Features:
- Highly polished stainless steel from top to bottom
- Finial and base are cast from 1" diameter 304 stainless steel
- Unique flag clips are cast from 304 stainless steel which holds your flag taut so your flag is never tangled
- Holds your flag taut so your flag is never tangled (flag sold separately)
Selecting a Flag:
- Although flags come in standardized sizes, there are guidelines to help you select the proper size for your boat
- The size of a nautical flag is determined by the size of the boat that flies it
- Flags are more often too small than too large
- So in the rules below, round upward to the nearest larger standard size
- The flag at the stern of your boat: U.S. ensign or national flag should be about one inch for each foot of overall length
- For example, on a 40ft. boat, the ensign should be 40 in. i.e. about 3.5ft
- Other flags, such as club burgees, private signals and courtesy flags for use on sailboats, should be approximately 1/2 inch for each foot of the highest mast above the water.
- For example, on a 30ft. boat, with 50ft. between the masthead and the water, the burgee should be about 25 in. i.e. about 2 ft
- The shape and proportions of pennants and burgees will be prescribed by the organization which they relate to
- The flag at the stern of your boat: U.S. ensign or national flag should be about one inch for each foot of overall length
Specifications:
- Select pole length
- Select recommended flag size (flag sold separately)
- Base: 1" Diameter
- Angle: 60 Degrees
- Material: Cast 304 stainless steel base
- Mount is included